Eversolo Z-10 DAC

The Z-10 employs Eversolo's Fully Isolated Architecture to segregate digital and analog circuits, substantially reducing noise interference and maintaining signal integrity. Dedicated linear power supplies serve the left channel, central processing, and right channel independently, each operating in an exceptionally low-noise state. The dual-channel topology incorporates matched AK4191 and AK4499 decoder pairs for left and right channels, paired with a fully balanced analog preamplifier utilizing precision dual-channel R2R attenuation. This architecture delivers measurably superior dynamic range and reduced harmonic distortion, enabling complete realization of your music's sonic character.

Fully balanced R2R Network:

The concept of “independent left and right channels” extends to volume control. The DAC-
Z10 employs a high-precision R2R resistor network, with separate R2R modules for eachchannel. Unlike conventional digital volume, which can introduce quantization loss, the
R2R network preserves signal integrity and phase alignment at every step. From very low
to high playback levels, the sound remains pure and full, with every knob adjustment
resulting in precise analog-level changes. This is the essence of the DAC-Z10—capturing
every nuance of the music with the purest analog precision.

Extensive Connectivity:

The DAC-Z10 offers extensive connectivity options to meet the demands of high-end
systems. It features USB Audio in, dual coaxial in, dual optical in, IIS in, AES/EBU in,
and HDMI ARC input. The USB input employs a multi-core audio processor, supporting
DSD512 Native and PCM 768 kHz/32-bit lossless transmission. The IIS input provides
eight customizable modes to ensure compatibility with a variety of sources from different
brands. All inputs use electrical isolation to fully eliminate ground loop interference,
delivering every signal in its purest form.

Another core element of the FIA design is the DAC-Z10’s dual AKM decoding
modules. Each channel is handled by a dedicated set of AK4191 + AK4499 chips,
meaning the left and right digital signals remain completely separated from input to
conversion. This design not only eliminates channel crosstalk but also enhances
dynamic range and resolution. Combined with AKM’s Velvet SoundTM technology, the
DAC-Z10 delivers audio that is both precise and delicate. Even at high specifications
—DSD512 and PCM 768 kHz/32-Bit—it maintains ultra-low distortion (THD+N
0.00008%) and wide dynamic range (DNR 130 dB), letting the music flow with the
energy and presence of a live performance.

Specifications

Display

8.8" IPS
Chassis Material

Aluminium alloy
Main Processor

DCP8568
DAC

Left Channel: AK4191+AK4499

Right Channel: AK4191+AK4499
Audio Processor

Multi-core USB audio processor
OPA Chip

OPA1612
Power

Triple ultra-low noise linear power supplies
Bluetooth Audio Input

Qualcomm QCC5125 Bluetooth module, Bluetooth version: BT5.0; supports SBC/AAC Bluetooth audio protocols
USB-B Audio Input

Compatible with Windows 10 and above, macOS, Android, and iOS; supports up to Stereo DSD512 / PCM 768kHz 32Bit
IIS Input

Supports 8 mode configurations, up to Stereo DSD512 / PCM 768kHz 32Bit
AES/EBU Input

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP
Optical Audio Inputs *2

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP
Coaxial Audio Inputs *2

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP
ARC Input

Up to Stereo PCM 192KHz/24Bit
Analog Audio Inputs

XLR (Balanced), RCA
Analog Audio Outputs

Pre-out: XLR (Balanced), RCA; Headphone out: 6.35mm single-ended
External Clock Input

Supports 10M/25M clock inputs with 50Ω or 75Ω impedance
Recommended Headphone Impedance

16–300Ω (Low Gain: 16–32Ω / High Gain: 32–300Ω)
XLR Output Audio Characteristics

Output Level (Vrms): 5Vrms @ 0dBFS

THD+N @ No-wt: 0.00008% @ 1kHz (-122dB @ 1kHz)

Noise @ No-wt: <1.2uVrms

SNR @ A-wt: 130dB

Frequency Response: 20Hz–20kHz (±0.1dB)

Crosstalk: -130dB

DNR @ A-wt: 130dB
RCA Output Audio Characteristics

Output Level (Vrms): 2.5Vrms @ 0dBFS

THD+N @ No-wt: 0.000097% @ 1kHz (-120dB @ 1kHz)

Noise @ No-wt: <1.5uVrms

SNR @ A-wt: 128dB

Frequency Response: 20Hz–20kHz (±0.1dB)

Crosstalk: -123dB

DNR @ A-wt: 128dB
Headphone Audio Characteristics (Low Gain Mode)

Output Level (Vrms): 4Vrms @ 0dBFS

THD+N @ No-wt: 0.0003% @ 1kHz (-110dB @ 1kHz)

Noise @ No-wt: <2.5uVrms

SNR @ A-wt: 124dB

Frequency Response: 20Hz–20kHz (±0.1dB)

DNR @ A-wt: 124dB

Headphone Audio Characteristics (Mid Gain Mode)

Output Level (Vrms): 5.6Vrms @ 0dBFS

THD+N @ No-wt: 0.00018% @ 1kHz (-115dB @ 1kHz)

Noise @ No-wt: <2.5uVrms

SNR @ A-wt: 126dB

Frequency Response: 20Hz–20kHz (±0.1dB)

DNR @ A-wt: 126dB

Headphone Audio Characteristics (High Gain Mode)

Output Level (Vrms): 7Vrms @ 0dBFS

THD+N @ No-wt: 0.00013% @ 1kHz (-118dB @ 1kHz)

Noise @ No-wt: <2.5uVrms

SNR @ A-wt: 127dB

Frequency Response: 20Hz–20kHz (±0.1dB)

DNR @ A-wt: 127dB

Power Supply

AC 110~240V 50/60Hz

USB Port

USB2.0*1（only for firmware upgrade）

Control Methods

Touchscreen control, remote control, mobile App control

Rated Power Consumption

32W

Dimensions

365mm (L) × 310mm (W) × 88mm (H)

Packing List:

Remote control ×1, power cable ×1, USB data cable ×1, USB drive (for FW upgrade) ×1, TRIGGER cable ×1, polishing cloth ×1, user manual ×1