{"title":"Hi-Fi Hardware","description":"","products":[{"product_id":"ferrum-oor","title":"Ferrum Oor","description":"\u003cp\u003eThe Ferrum OOR is the headphone amplifier that Ferrum built as their defining statement, a fully balanced, discrete design with a proprietary output stage that keeps transistors permanently active, eliminating the zero-crossing distortion that plagues conventional topologies and delivering 8 watts balanced into 60 ohms with vanishingly low noise.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop headphone amplifier, fully balanced, solid-state. Proprietary discrete power amp technology developed in-house. Truly balanced signal path from XLR input and electronically balanced from RCA input. Three-position gain switch for headphones of any impedance and sensitivity. Optional connection to \u003ca href=\"\/products\/ferrum-hypsos\"\u003eFerrum HYPSOS\u003c\/a\u003e linear power supply via the proprietary Ferrum Power Link (FPL) cable for further performance improvements. Made in Poland.\u003c\/p\u003e\n\n\u003ch3\u003eUpgrade Path\u003c\/h3\u003e\n\u003cp\u003eThe OOR's performance improves meaningfully when powered by the \u003ca href=\"\/products\/ferrum-hypsos\"\u003eFerrum HYPSOS\u003c\/a\u003e via the FPL connector, a dedicated linear supply with 4-Terminal Sensing specifically designed for Ferrum products. Pair with the \u003ca href=\"\/products\/ferrum-wandla\"\u003eFerrum Wandla 2.0\u003c\/a\u003e DAC\/preamp for a matched, all-Ferrum source and amplifier system.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eTransparent, dynamic, and effortlessly controlled. The OOR has complete composure across the frequency range, ultra low distortion, a silent noise floor, and enormous headroom. A headphone amplifier that disappears from the chain and lets the recording, source, and headphone speak for themselves.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eCompact aluminum chassis at 21.7 x 20.6 x 5 cm and 1.8 kg. Comes with a carefully selected DC power adapter. Upgrade path available via the \u003ca href=\"\/products\/ferrum-hypsos\"\u003eFerrum HYPSOS\u003c\/a\u003e and FPL cable. Available in silver and black.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want a transparent, high-power headphone amplifier that never limits the headphone's potential, particularly effective with demanding planars. An ideal partner for the \u003ca href=\"\/products\/ferrum-wandla\"\u003eFerrum Wandla 2.0\u003c\/a\u003e DAC.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFerrum OOR headphone amplifier\u003c\/li\u003e\n\u003cli\u003eDC power adapter\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFully balanced desktop headphone amplifier, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain options\u003c\/td\u003e\n\u003ctd\u003eBalanced: -4 dB, +6 dB, +16 dB \/ Single-ended: -10 dB, 0 dB, +10 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eXLR balanced, RCA unbalanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e4-pin XLR balanced, 6.35mm single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (balanced)\u003c\/td\u003e\n\u003ctd\u003e8W into 60 ohms, 1.6W into 300 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (single-ended)\u003c\/td\u003e\n\u003ctd\u003e2W into 60 ohms, 400mW into 300 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20 Hz - 100 kHz (+\/-0.1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e94k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance (headphone)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.3 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eDC 22-30V (adapter included); FPL port for HYPSOS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e217 x 206 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Ferrum","offers":[{"title":"No","offer_id":41630469947549,"sku":"","price":2275.0,"currency_code":"USD","in_stock":true},{"title":"+Hypsos \u0026 Power Link (+$1395)","offer_id":41630469980317,"sku":"","price":3670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/OnblackOOR_front_back.png?v=1638944125"},{"product_id":"benchmark-ahb2-power-amplifier","title":"Benchmark AHB2 Power Amplifier","description":"\u003cp\u003eThe Benchmark AHB2 is the power amplifier that THX AAA technology made possible, 132dB SNR, less than 0.0003% THD at full rated output, and a dynamic range that surpasses most reference power amplifiers by 10 to 30dB. Designed, assembled, and tested in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eStereo power amplifier (convertible to bridged mono), solid-state. THX Achromatic Audio Amplifier (AAA) technology with proprietary feed-forward error correction that eliminates crossover distortion without class-A power consumption. Class-H tracking power supply rails for improved efficiency. 29A peak current per channel. Three-position gain switch. 12V trigger I\/O. Made in USA.\u003c\/p\u003e\n\n\u003ch3\u003eSystem Context\u003c\/h3\u003e\n\u003cp\u003eThe AHB2 is the natural loudspeaker amplifier for the Benchmark stack. Drive it from the \u003ca href=\"\/products\/benchmark-la4-line-amplifier\"\u003eBenchmark LA4\u003c\/a\u003e preamplifier for the ideal two-component speaker system, or from the \u003ca href=\"\/products\/benchmark-hpa4-headphone-line-amplifier\"\u003eBenchmark HPA4\u003c\/a\u003e when you want both headphone and speaker capability. Source the entire system from the \u003ca href=\"\/products\/benchmark-dac3-b\"\u003eBenchmark DAC3 B\u003c\/a\u003e or \u003ca href=\"\/products\/benchmark-dac3-l\"\u003eDAC3 L\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want the most accurate, lowest noise power amplifier available, the natural partner for the \u003ca href=\"\/products\/benchmark-la4-line-amplifier\"\u003eLA4\u003c\/a\u003e and \u003ca href=\"\/products\/benchmark-dac3-b\"\u003eDAC3 B\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBenchmark AHB2 power amplifier\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eStereo power amplifier (bridged mono capable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eTHX AAA with feed-forward error correction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (stereo)\u003c\/td\u003e\n\u003ctd\u003e100W\/ch at 8 ohms, 190W\/ch at 4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (bridged mono)\u003c\/td\u003e\n\u003ctd\u003e380W at 8 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003eLess than 0.0003% at full rated output, 20Hz-20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003e132 dB A-weighted (stereo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping factor\u003c\/td\u003e\n\u003ctd\u003e350 at 20Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak output current\u003c\/td\u003e\n\u003ctd\u003e29A per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (non-rack)\u003c\/td\u003e\n\u003ctd\u003e11.04\" W x 3.47\" H x 8.33\" D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Benchmark","offers":[{"title":"Black","offer_id":41684453523613,"sku":"","price":3499.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":41684453556381,"sku":"","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/AHB2_Silver_FrontRt_04_2000x_9b714c91-2a4d-47ab-950a-14d2a61bf86e.jpg?v=1640315851"},{"product_id":"benchmark-hpa4-headphone-line-amplifier","title":"Benchmark HPA4 Headphone\/Line Amplifier","description":"\u003cp\u003eThe Benchmark HPA4 is the ultimate expression of the THX-888 amplifier design in a headphone and line amplifier, 256-step relay gain control in 0.5dB increments, 64 precision relays, SNR above 131dB, and THD below 0.00006%. Designed, assembled, and tested in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop headphone amplifier and line preamplifier, fully balanced, 100% analog signal path. THX-888 with AAA feed-forward error correction. 256-step relay gain control (0.5dB steps). Balanced XLR and unbalanced RCA inputs and outputs. Balanced 4-pin XLR and 6.35mm headphone outputs. Touch screen. IR remote compatible with \u003ca href=\"\/products\/benchmark-dac3-b\"\u003eBenchmark DAC3\u003c\/a\u003e, single remote operates both. 12V trigger I\/O.\u003c\/p\u003e\n\n\u003ch3\u003eSystem Context\u003c\/h3\u003e\n\u003cp\u003eThe HPA4 bridges the \u003ca href=\"\/products\/benchmark-dac3-b\"\u003eBenchmark DAC3 B\u003c\/a\u003e (or \u003ca href=\"\/products\/benchmark-dac3-l\"\u003eDAC3 L\u003c\/a\u003e) to headphones and loudspeakers simultaneously. Its line outputs can feed the \u003ca href=\"\/products\/benchmark-ahb2-power-amplifier\"\u003eBenchmark AHB2\u003c\/a\u003e power amplifier for a complete headphone and speaker system from a single preamp. One remote controls the whole stack.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eSerious audiophiles who want the finest headphone amplifier and line preamp available, the ideal bridge between the \u003ca href=\"\/products\/benchmark-dac3-b\"\u003eBenchmark DAC3\u003c\/a\u003e and \u003ca href=\"\/products\/benchmark-ahb2-power-amplifier\"\u003eAHB2\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBenchmark HPA4\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop headphone amplifier and line preamplifier, 100% analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone THD\u003c\/td\u003e\n\u003ctd\u003eLess than 0.00006% (-125 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone SNR\u003c\/td\u003e\n\u003ctd\u003eGreater than 131 dB unweighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax headphone output power\u003c\/td\u003e\n\u003ctd\u003e6W into 16 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e4-pin XLR balanced, 6.35mm single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume control\u003c\/td\u003e\n\u003ctd\u003e256-step relay (0.5 dB\/step)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e0.01 Hz to over 500 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e8.65\" x 3.47\" x 8.33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e8.0 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Benchmark","offers":[{"title":"Black \/ Yes (+$100)","offer_id":41698262941853,"sku":"","price":3599.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ No","offer_id":41698262974621,"sku":"","price":3499.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Yes (+$100)","offer_id":41698263007389,"sku":"","price":3599.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No","offer_id":41698263040157,"sku":"","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/HPA4_Silver_M0-cropped1x1_2000x_1c3143ed-5fe9-4dfa-a326-4609c8ca5244.jpg?v=1640334913"},{"product_id":"benchmark-dac3-b","title":"Benchmark DAC3 B","description":"\u003cp\u003eThe Benchmark DAC3 B is the stripped-down race car of the DAC3 series, all the conversion performance of the flagship DAC3 HGC with volume control, analog inputs, and headphone amplifier removed, leaving a clean, pure DAC optimized for use with a dedicated preamplifier. Designed, assembled, and tested in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference stereo DAC, solid-state. ESS Technologies ES9028PRO with four balanced 32-bit D\/A converters summed per channel for 6dB noise reduction and 125dB SNR. Benchmark UltraLock3 jitter attenuation on all inputs. 5 digital inputs: 1x USB (up to 192kHz), 2x optical, 2x coaxial. Balanced XLR and unbalanced RCA outputs. Native DSD64 via DoP 1.1. IR remote compatible with \u003ca href=\"\/products\/benchmark-hpa4-headphone-line-amplifier\"\u003eHPA4\u003c\/a\u003e and \u003ca href=\"\/products\/benchmark-la4-line-amplifier\"\u003eLA4\u003c\/a\u003e. Made in USA.\u003c\/p\u003e\n\n\u003ch3\u003eSystem Context\u003c\/h3\u003e\n\u003cp\u003eThe DAC3 B is the source component at the heart of the Benchmark system stack. Pair it with the \u003ca href=\"\/products\/benchmark-hpa4-headphone-line-amplifier\"\u003eBenchmark HPA4\u003c\/a\u003e for a headphone-focused system, the \u003ca href=\"\/products\/benchmark-la4-line-amplifier\"\u003eBenchmark LA4\u003c\/a\u003e for a speaker-focused system, or run both simultaneously, the DAC3 B feeds either perfectly. Add the \u003ca href=\"\/products\/benchmark-ahb2-power-amplifier\"\u003eBenchmark AHB2\u003c\/a\u003e power amplifier for the complete reference loudspeaker chain. Single IR remote operates the entire stack.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want pure DAC3 conversion into the \u003ca href=\"\/products\/benchmark-hpa4-headphone-line-amplifier\"\u003eHPA4\u003c\/a\u003e or \u003ca href=\"\/products\/benchmark-la4-line-amplifier\"\u003eLA4\u003c\/a\u003e without paying for controls they will not use.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBenchmark DAC3 B\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference stereo DAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chip\u003c\/td\u003e\n\u003ctd\u003eESS ES9028PRO (4x per channel, summed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003e125 dB A-weighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e-113 dB (0.00022%) at 0 dBFS, 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003e1x USB (up to 192kHz), 2x optical (up to 96kHz), 2x coaxial (up to 192kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput level (balanced)\u003c\/td\u003e\n\u003ctd\u003e+24 dBu at 0 dBFS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative DSD\u003c\/td\u003e\n\u003ctd\u003eDSD64 via DoP 1.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e9.5\" x 1.725\" x 9.33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Benchmark","offers":[{"title":"Black","offer_id":41711255027869,"sku":"","price":1899.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":41711255060637,"sku":"","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/DAC3B_Black_Front_Shopify_2000x_fc98328c-4293-4590-bb6c-0e314ee84615.jpg?v=1640834916"},{"product_id":"benchmark-dac3-l","title":"Benchmark DAC3 L","description":"\u003cp\u003eThe Benchmark DAC3 L adds volume control, analog inputs, home theater bypass, and polarity inversion to the DAC3 B, making it a capable DAC and preamplifier that can drive power amplifiers directly without a separate preamp, with the full DAC3 conversion performance intact. Designed, assembled, and tested in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference stereo DAC with analog preamplifier, solid-state. ESS Technologies ES9028PRO with four balanced 32-bit D\/A converters summed per channel. Benchmark UltraLock3 jitter attenuation. 5 digital inputs: 1x USB, 2x optical, 2x coaxial. Analog inputs: 2x RCA. Outputs: balanced XLR (variable or bypass), 4x RCA including home theater bypass. Variable output level for direct amplifier driving. Polarity inversion switch. Native DSD64 via DoP 1.1. Bi-directional 12V trigger. IR remote. Available in black or silver. Made in USA.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eIdentical DAC performance to the DAC3 B with the addition of an analog gain stage for volume control. The variable output uses a passive attenuator at the XLR outputs for optimized gain staging to the power amplifier, a thoughtful design that delivers the best possible system SNR at every listening level. The overall character is Benchmark's hallmark transparency and accuracy.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eHalf-rack width, 1RU height. 16 LED front panel status display for input, sample rate, word length, dim\/mute, polarity, and bypass status. Matched footprint to HPA4, LA4, and AHB2. Available in black or silver.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want to drive power amplifiers directly from a reference DAC with analog volume control, or those building a two-channel system without a separate preamplifier component.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBenchmark DAC3 L converter\/preamplifier\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference stereo DAC with analog preamplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chip\u003c\/td\u003e\n\u003ctd\u003eESS Technologies ES9028PRO (4x per channel, summed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003e128 dB A-weighted, 126 dB unweighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e-113 dB (0.00022%) at 0 dBFS, 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003e1x USB (up to 192kHz), 2x optical (up to 96kHz), 2x coaxial (up to 192kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e2x RCA stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR (variable), 4x RCA (including home theater bypass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput level (balanced, bypass)\u003c\/td\u003e\n\u003ctd\u003e+24 dBu at 0 dBFS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative DSD support\u003c\/td\u003e\n\u003ctd\u003eDSD64 via DoP 1.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e12W typical, 15W max, less than 0.5W idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e9.5\" x 1.725\" x 9.33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Benchmark","offers":[{"title":"Black \/ Yes (+$100)","offer_id":41711309619357,"sku":"","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ No","offer_id":41711309684893,"sku":"","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Yes (+$100)","offer_id":41711309750429,"sku":"","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No","offer_id":41711309848733,"sku":"","price":2099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/Remote_and_Black_L_2000x_e5455cdf-4c9d-41e1-9736-058868ef3c5c.jpg?v=1640835010"},{"product_id":"benchmark-la4-line-amplifier","title":"Benchmark LA4 Line Pre-Amplifier","description":"\u003cp\u003eThe Benchmark LA4 is the HPA4 without the headphone amplifier, a 100% analog line preamplifier with the same THX-888 relay gain control, the same vanishingly low distortion, and SNR above 135dB, making it the only preamplifier Benchmark recommends inserting between a DAC3 and AHB2 without degrading system performance. Designed, assembled, and tested in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop line preamplifier, fully balanced, 100% analog. THX-888 with relay gain control, 256 steps in 0.5dB increments using 40 precision gold-contact relays. Balanced XLR and unbalanced RCA inputs and outputs. Touch screen. IR remote compatible with \u003ca href=\"\/products\/benchmark-dac3-b\"\u003eBenchmark DAC3\u003c\/a\u003e. 12V bidirectional trigger I\/O.\u003c\/p\u003e\n\n\u003ch3\u003eSystem Context\u003c\/h3\u003e\n\u003cp\u003eThe LA4 is the dedicated preamplifier for listeners who use the \u003ca href=\"\/products\/benchmark-ahb2-power-amplifier\"\u003eBenchmark AHB2\u003c\/a\u003e for speakers and do not need headphone amplification from their preamp. If you also want headphone capability, the \u003ca href=\"\/products\/benchmark-hpa4-headphone-line-amplifier\"\u003eBenchmark HPA4\u003c\/a\u003e performs the same preamplifier role with an integrated headphone stage.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who need a preamplifier between the \u003ca href=\"\/products\/benchmark-dac3-b\"\u003eBenchmark DAC3\u003c\/a\u003e and \u003ca href=\"\/products\/benchmark-ahb2-power-amplifier\"\u003eAHB2\u003c\/a\u003e and do not require headphone amplification. The LA4 preserves the full system performance of the Benchmark stack without compromise.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBenchmark LA4 line preamplifier\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop line preamplifier, 100% analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003eLess than 0.00006% (-125 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003eGreater than 135 dB unweighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume control\u003c\/td\u003e\n\u003ctd\u003e256-step relay (0.5 dB\/step)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine inputs\u003c\/td\u003e\n\u003ctd\u003e2x balanced XLR, 2x unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR stereo, balanced XLR mono sum, unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e0.01 Hz to over 500 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e8.65\" x 3.47\" x 8.33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e8.0 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Benchmark","offers":[{"title":"Black \/ Yes (+$100)","offer_id":41711349104797,"sku":"","price":3050.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ No","offer_id":41711349170333,"sku":"","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Yes (+$100)","offer_id":41711349203101,"sku":"","price":3050.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No","offer_id":41711349268637,"sku":"","price":2950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/LA4_Black_Front_Shopify_2000x_fdd6d3e6-d478-4de2-aa85-65475d1da677.jpg?v=1640835053"},{"product_id":"enleum-amp-23r","title":"Enleum Amp-23R","description":"\u003cp\u003eThe Enleum Amp-23R is one of the most technically original integrated amplifiers in the hobby, a compact, single-chassis design that drives both loudspeakers (25W at 8 ohms) and headphones from the same proprietary discrete circuit, with Enleum's ENLINK current input for direct connection to compatible DACs without voltage conversion.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eIntegrated stereo amplifier and headphone amplifier, solid-state. Ensence module input stage, fully discrete, zero negative feedback, ultra-fast frequency response. JET2 Bias second-generation output circuit for improved thermal stability and accuracy. MPU-controlled stepped attenuator for consistent performance at all volume levels. ENLINK (BNC) proprietary current input for direct current-mode connection. Two RCA voltage inputs. Five-way speaker binding posts plus 6.35mm headphone output. Remote control included. Pre-order: currently scheduled for Q3 2025 fulfillment.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eImmediate, transparent, and dynamically authoritative, the Amp-23R has the tonal linearity and noise floor of a reference headphone amplifier combined with the output power to drive demanding loudspeaker loads. The ENLINK current input, when used with a compatible current-output DAC, eliminates the voltage-to-current conversion step entirely, providing a purer signal path than any conventional voltage-input topology.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined aluminum chassis at 230 x 230 x 55mm and just 4kg, remarkably compact for an integrated amplifier with this output capability. Minimal front-panel interface: one button, gain\/phase control, and remote. The design identity flows from Enleum's award-winning AMP-23R aesthetic.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want a single compact component that handles both headphone and loudspeaker listening at a serious performance level, particularly those using a current-output DAC who want to take advantage of ENLINK direct connection.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnleum Amp-23R integrated amplifier\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Pre-order item, currently scheduled for Q3 2025 fulfillment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eIntegrated stereo amplifier and headphone amplifier, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (speaker)\u003c\/td\u003e\n\u003ctd\u003e25W at 8 ohms, 45W at 4 ohms, 4W at 60 ohms (1kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e22.5 dB max (speaker \/ HP high gain), 7 dB max (HP low gain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e2x RCA, 1x ENLINK current input (BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e5-way speaker binding posts, 6.35mm headphone jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e10 Hz-100 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e10k ohms (voltage), 10 ohms (ENLINK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain control\u003c\/td\u003e\n\u003ctd\u003eMPU-controlled stepped attenuator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e230 x 230 x 55 mm (82.5 mm with isolation feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.0 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Enleum","offers":[{"title":"Default Title","offer_id":44221316661527,"sku":"","price":6500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/AMP-23R_front-2048x1024.jpg?v=1652998434"},{"product_id":"ferrum-hypsos","title":"Ferrum Hypsos Dual Output","description":"\u003cp\u003eThe Ferrum HYPSOS Dual Output is a hybrid linear\/switching power supply that Ferrum describes as an audio component in its own right, providing clean, precisely regulated DC power to two components simultaneously, with Sweet Spot Tuning voltage adjustment, 4-Terminal Sensing, and software control features that go well beyond a conventional audiophile linear supply. Made in Poland.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDual output hybrid power supply. Linear\/switching hybrid design. Two simultaneous DC outputs, combined 60W continuous output at up to 6A total. Wide continuous output voltage range of 5-30V with Sweet Spot Tuning (SST) for fine-tuning voltage to optimize sound. 4-Terminal Sensing Design (4TSD) on the main output. Overvoltage, current limit, and short circuit protection. Auto-switching mains: 100-120V and 220-240V. Made in Poland.\u003c\/p\u003e\n\n\u003ch3\u003eSystem Integration\u003c\/h3\u003e\n\u003cp\u003eThe HYPSOS Dual Output connects to the \u003ca href=\"\/products\/ferrum-oor\"\u003eFerrum OOR\u003c\/a\u003e and \u003ca href=\"\/products\/ferrum-wandla\"\u003eFerrum Wandla 2.0\u003c\/a\u003e via the proprietary FPL cable, providing dedicated linear power to both components simultaneously from a single HYPSOS unit. This is the primary recommended upgrade for any Ferrum system owner. Also compatible with the \u003ca href=\"\/products\/ferrum-erco-2\"\u003eFerrum ERCO Gen 2\u003c\/a\u003e via FPL.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eA cleaner power supply removes a layer of noise from every component it feeds. The HYPSOS Dual Output's hybrid design produces a quiet, fast, and stable DC output that allows the powered component to perform at its best. SST voltage tuning adds a practical tool for ongoing system optimization.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eMatched form factor to the \u003ca href=\"\/products\/ferrum-oor\"\u003eFerrum OOR\u003c\/a\u003e and \u003ca href=\"\/products\/ferrum-wandla\"\u003eFerrum Wandla 2.0\u003c\/a\u003e at 217 x 206 x 50mm and 3.05kg. Made in Poland.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFerrum HYPSOS Dual Output power supply\u003c\/li\u003e\n\u003cli\u003eDC output cable (fitted to order)\u003c\/li\u003e\n\u003cli\u003eMains cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDual output hybrid linear\/switching power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput voltage range\u003c\/td\u003e\n\u003ctd\u003e5 - 30V DC (same voltage on both outputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax continuous output power\u003c\/td\u003e\n\u003ctd\u003e60W (both outputs combined)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax continuous output current\u003c\/td\u003e\n\u003ctd\u003e6A (both outputs combined)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensing\u003c\/td\u003e\n\u003ctd\u003e4-Terminal Sensing Design (4TSD) on main output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower input\u003c\/td\u003e\n\u003ctd\u003e110-120V \/ 220-240V AC, 50-60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e217 x 206 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.05 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Ferrum","offers":[{"title":"Ferrum Power Link","offer_id":42350201602205,"sku":"","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"2.1mm DC","offer_id":42350201634973,"sku":"","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm DC","offer_id":42350201667741,"sku":"","price":1595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/Ferrum-Hypsos-Dual.jpg?v=1714506724"},{"product_id":"cayin-ha300-mk3","title":"Cayin HA300-MK3","description":"\u003cp\u003eThe Cayin HA-300 MK3 is the third-generation evolution of Cayin's flagship 300B headphone amplifier, a pure Class A single-ended triode design that has been comprehensively upgraded with third-generation wide-bandwidth transformers, DUELUND coupling capacitors, a redesigned power supply architecture, and dramatically expanded headphone compatibility. Every unit ships with hand-matched tubes and 48 hours of factory burn-in. The 300B character, rich midrange, natural warmth, expansive staging, is more refined and capable than ever.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop headphone amplifier and speaker amplifier, single-ended Class A triode. Dual-chassis design with physically separated power supply to minimize magnetic interference. Genalex Gold Lion PX300B output tubes. JJ 6SN7 voltage amplification. JJ GZ34\/5AR4 tube rectification (with broader tube rolling compatibility than the MK2). Third-generation wide-bandwidth EI output transformers developed specifically for this model. Custom toroidal power transformer with high-purity copper winding for lower magnetic noise. DUELUND coupling capacitors from Denmark. Gold-plated tube sockets. Point-to-point hand wiring throughout. Three impedance settings (Low, Mid, High). 60-second delayed soft start. JRC MUSES 72320V volume control with 41-step ALPS attenuator. Remote control. Speaker output terminals (4-8 ohm loads). Lock-and-release umbilical cable system connecting the two chassis.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe MK3 delivers what only a 300B single-ended triode can, a midrange of extraordinary density and tonal color, a soundstage of unusual three-dimensionality, and a natural musical flow that solid-state amplification cannot replicate. The upgraded transformer system and DUELUND capacitors add a new layer of resolution and control to the classic 300B character, making the MK3 noticeably more transparent and spatially coherent than its predecessor without losing the warmth that defines the platform. The dramatically lower noise floor, shockingly quiet for a 300B design, makes it genuinely compatible with sensitive IEMs as well as demanding planars.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eRedesigned dual-chassis with a fine sandblasted aluminum finish for improved wear resistance and reduced fingerprint visibility. New family-style protective tube cage. Removable cages on both chassis. VU meters on the amplifier front panel. Premium gold-plated tube sockets. 48-hour factory burn-in and hand-matched tube selection on every unit. Lockable umbilical cable between chassis for stable, low-loss power delivery.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want the definitive 300B headphone amplifier experience with meaningfully improved noise performance, broader headphone compatibility, and the finest component quality Cayin has put into this platform, from sensitive IEMs to the HiFiMan Susvara and beyond.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCayin HA-300 MK3 headphone amplifier chassis\u003c\/li\u003e\n\u003cli\u003eCayin HA-300 MK3 power supply chassis\u003c\/li\u003e\n\u003cli\u003eLock-and-release umbilical cable\u003c\/li\u003e\n\u003cli\u003eGenalex Gold Lion PX300B output tubes (hand-matched pair, 48hr burn-in)\u003c\/li\u003e\n\u003cli\u003eJJ 6SN7 driver tubes\u003c\/li\u003e\n\u003cli\u003eJJ GZ34\/5AR4 rectifier tubes\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eSpare fuses\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop headphone and speaker amplifier, single-ended Class A triode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTopology\u003c\/td\u003e\n\u003ctd\u003eSingle-ended Class A, dual-chassis with external power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tubes\u003c\/td\u003e\n\u003ctd\u003eGenalex Gold Lion PX300B (matched pair, 48hr factory burn-in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver tubes\u003c\/td\u003e\n\u003ctd\u003eJJ 6SN7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tubes\u003c\/td\u003e\n\u003ctd\u003eJJ GZ34 \/ 5AR4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (4-pin XLR)\u003c\/td\u003e\n\u003ctd\u003e6,500 mW per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (6.35mm)\u003c\/td\u003e\n\u003ctd\u003e6,000 mW per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (4.4mm Pentaconn)\u003c\/td\u003e\n\u003ctd\u003e1,600 mW per channel (optimized for IEMs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e4-pin XLR balanced, 4.4mm Pentaconn, 6.35mm single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker outputs\u003c\/td\u003e\n\u003ctd\u003eYes (4-8 ohm loads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance settings\u003c\/td\u003e\n\u003ctd\u003eLow, Mid, High (3-stage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransformers\u003c\/td\u003e\n\u003ctd\u003e3rd-gen wide-bandwidth EI output transformers, custom toroidal power transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling capacitors\u003c\/td\u003e\n\u003ctd\u003eDUELUND (Denmark)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume control\u003c\/td\u003e\n\u003ctd\u003eJRC MUSES 72320V + 41-step ALPS attenuator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePoint-to-point hand wiring, gold-plated tube sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoft start\u003c\/td\u003e\n\u003ctd\u003e60-second delayed mute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Cayin","offers":[{"title":"Black","offer_id":42722831597725,"sku":"","price":4399.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42722831630493,"sku":"","price":4399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/HA-300MK3Black_7_1392x928_png.webp?v=1779161574"},{"product_id":"chord-etude","title":"Chord Etude","description":"\u003cp\u003eThe Chord Electronics Etude is a 150W Class AB stereo power amplifier built around the first fundamentally new amplifier topology Chord has developed since 1989, multi-feedback and dual feed-forward error-correction technology drawn from aerospace engineering, applied to a high-current MOSFET output stage that delivers effortless dynamics and exceptional speaker control.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eStereo power amplifier, Class AB solid-state. Proprietary multi-feedback and dual feed-forward error-correction topology using 250W lateral structure high-power MOSFETs. Three independent switch-mode power supply units (one per active power rail, one auxiliary). Active-cooled plenum chamber design. Advanced internal shielding. Bridgeable to mono for 300W into 4 ohms. Balanced XLR and unbalanced RCA inputs. Available in Silver or Black. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eRemarkably fast, controlled, and dynamically alive. Chord's feed-forward error-correction topology eliminates distortion at the output stage in real time, resulting in a presentation of transient accuracy and low-level detail that few conventional amplifier designs can match. Bass is tight and authoritative, midrange is neutral and transparent, and treble is extended without any hardness. Pairs naturally with the Chord DAVE as a complete amplification system.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined aircraft-grade aluminium chassis reflecting Chord's distinctive industrial aesthetic. Compact for a 150W amplifier at 6.7cm H x 33.5cm W x 17.5cm D. Active cooling for consistent performance under sustained high-output conditions. Available in Silver or Black.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want a high-power stereo or bridged mono amplifier with Chord's proprietary topology, particularly as a matched partner for the Chord DAVE or Prima preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Etude stereo power amplifier\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eStereo power amplifier, Class AB solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (stereo)\u003c\/td\u003e\n\u003ctd\u003e150W RMS per channel at 0.05% distortion into 4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (mono bridge)\u003c\/td\u003e\n\u003ctd\u003e300W into 4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e5 Hz - 100 kHz (+\/-0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e30 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel separation\u003c\/td\u003e\n\u003ctd\u003eBetter than 95 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e100k ohms (balanced and unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003e0.02 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e67 x 335 x 175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Black","offer_id":42723186704541,"sku":"","price":7165.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42723186737309,"sku":"","price":7165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/Etude-Front-900x675.jpg?v=1660245139"},{"product_id":"chord-prima","title":"Chord Prima","description":"\u003cp\u003eThe Chord Electronics Prima is a fully balanced analog preamplifier built from solid aircraft-grade aluminium with five inputs, six independent gain adjustments, and an ultra-high-frequency power supply, designed as the natural partner for the Chord Etude power amplifier and a worthy preamp for any high-end system. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eAnalog preamplifier, fully balanced, solid-state. Ultra-high-frequency power supply for efficient and fast energy delivery. Five inputs: one balanced XLR and four unbalanced RCA. One balanced XLR output and one unbalanced RCA tape output. Six independent input gain adjustments. Low impedance outputs. Remote control and front-panel operation. Volume and balance controls on fascia; input selection and tape line selection on top-mounted push buttons. Top panel display for input and volume information. Viewing porthole to internal circuit board. Available in Silver or Black. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eTransparent, quiet, and neutral with the Chord house characteristic of dynamic openness and precise imaging. The fully balanced circuitry maintains signal integrity through the full signal path, and the ultra-high-frequency power supply responds instantly to musical demand for an effortless and low-noise presentation. A preamplifier that reveals the full potential of the source component it is connected to.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined from solid aircraft-grade aluminium billet. Compact at 335 x 170 x 65mm. Available in Silver or Black to match the Etude. Remote control included.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles building a complete Chord Electronics system with the Etude power amplifier, or those seeking a fully balanced analog preamplifier with comprehensive input flexibility and premium British construction.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Prima preamplifier\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAnalog preamplifier, fully balanced, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e1x balanced XLR, 4x unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e1x balanced XLR, 1x unbalanced RCA (tape)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e2.5 Hz - 200 kHz (+\/-3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003e100 ohms (short circuit protected)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating voltage\u003c\/td\u003e\n\u003ctd\u003e50 - 260V AC, 50-60Hz auto-switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e335 x 170 x 65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Black","offer_id":42723200401565,"sku":"","price":6830.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42723200434333,"sku":"","price":6830.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/5856867_8bf8999b-a0d5-4b3f-bf40-6259d06e79cf.jpg?v=1660245444"},{"product_id":"chord-dave","title":"Chord Dave","description":"\u003cp\u003eThe Chord Electronics DAVE, Digital to Analogue Veritas in Extremis, is the most advanced DAC Chord has ever produced, and one of the most technically accomplished digital-to-analog converters ever made by any manufacturer. At its heart is a Spartan 6 FPGA loaded with over a million lines of code, running a 164,000-tap WTA filter for a level of timing accuracy and noise-shaping performance that has no peer. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference DAC, digital preamplifier, and headphone amplifier, solid-state. Spartan 6 FPGA with 1,000x the processing power of a conventional DAC chip. 164,000-tap WTA filter. Industry-leading noise shaper performance. Lossless digital volume control for direct connection to power amplifiers. PCM support: 44.1kHz to 768kHz, 16-32bit. DSD64 to DSD512 native and via DoP. Digital inputs: 4x coaxial BNC (up to 384kHz), 1x AES XLR (up to 96kHz), 2x optical TOSLINK (up to 96kHz), 1x USB Type B (up to 768kHz, PCM and DSD). Stereo balanced XLR and unbalanced RCA outputs. One 6.35mm headphone output. Remote control and large LC display. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe DAVE presents digital recordings with a sense of timing accuracy, three-dimensional space, and low-level resolution that is genuinely unprecedented in the category, even at multiples of its price. The 164,000-tap filter recovers timing information from PCM with accuracy that brings recordings to life in ways listeners describe as transformative. The headphone amplifier section is reference-quality in its own right, with 0.055 ohm output impedance and sufficient output current for virtually any transducer.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined aircraft-grade aluminium with the characteristic DAVE porthole design. Large LC display showing input, sample frequency, volume, and configuration. Remote control and rotary encoder with stainless steel controller. Available in Silver or Jett Black.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eThe most serious audiophiles who want the finest digital source Chord Electronics makes, and the last DAC they will ever need to buy.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord DAVE DAC\/preamp\/headphone amp\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference DAC, digital preamplifier, and headphone amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFPGA\u003c\/td\u003e\n\u003ctd\u003eXilinx Spartan 6, 164,000-tap WTA filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e-127.5 dB (A-weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e127.5 dB (A-weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel separation\u003c\/td\u003e\n\u003ctd\u003eGreater than 125 dB at 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003e44.1kHz - 768kHz, 16-32bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eDSD64 - DSD512\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003e4x BNC coax, 1x AES XLR, 2x optical, 1x USB Type-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA, 6.35mm headphone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone output impedance\u003c\/td\u003e\n\u003ctd\u003e0.055 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e78 x 335 x 152 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Black","offer_id":42723227467933,"sku":"","price":14400.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42723227500701,"sku":"","price":14400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/Dave-Front-900x675.jpg?v=1660246258"},{"product_id":"chord-mojo2","title":"Chord Mojo2 - Now with USB C charging and 4.4mm headphone output","description":"\u003cp\u003eThe Chord Electronics Mojo 2 is the world's most advanced portable DAC and headphone amplifier, a refined evolution of the award-winning original Mojo, now with a 4.4mm balanced headphone output, USB-C charging, and Chord's proprietary FPGA digital technology in a pocket-sized chassis. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003ePortable DAC and headphone amplifier, solid-state. Xilinx Artix 7 FPGA with Chord's custom WTA filtering code. Five digital inputs: coaxial, dual-data coax, optical, Micro-USB, and USB-C. Headphone outputs: 4.4mm balanced and 3.5mm single-ended with independent volume memory. USB-C charging. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eModular Expansion\u003c\/h3\u003e\n\u003cp\u003eThe Mojo 2 pairs directly with the \u003ca href=\"\/products\/chord-poly\"\u003eChord Poly\u003c\/a\u003e wireless streaming module, which docks to the bottom of the Mojo 2 and adds Roon Ready streaming, AirPlay, Tidal, Qobuz, Bluetooth 5.0, and Micro SD card storage, transforming the Mojo 2 into a completely self-contained wireless streaming DAC\/amp.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eExtraordinary resolution and dynamics for a portable device, 125dB dynamic range and vanishingly low distortion. Both the balanced and single-ended outputs sound exceptional.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eCompact, robust, and pocketable. Familiar Chord construction with colour-coded control spheres. Available with the optional \u003ca href=\"\/products\/chord-poly\"\u003eChord Poly\u003c\/a\u003e module for wireless streaming.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Mojo 2 portable DAC\/headphone amp\u003c\/li\u003e\n\u003cli\u003eUSB-C charging cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePortable DAC and headphone amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e125 dB A-weighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e0.0003% at 2.5V \/ 300 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\u003ctd\u003e90mW \/ 300 ohms, 600mW \/ 30 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003e0.06 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eCoaxial, dual-data coax, optical, Micro-USB, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e4.4mm balanced, 3.5mm single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Default Title","offer_id":42723274096797,"sku":"","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/Mojo-2-snakeplant-2-1422x800.jpg?v=1660247200"},{"product_id":"chord-poly","title":"Chord Poly","description":"\u003cp\u003eThe Chord Poly is a portable streaming module that transforms the Mojo into a fully featured wireless music player, adding Wi-Fi, Bluetooth, AirPlay, DLNA, Roon endpoint, and a Micro SD card slot to an already exceptional portable DAC\/amp. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003ePortable streaming and storage module for the Chord Mojo. Wi-Fi (2.4GHz) and Bluetooth 4.1 connectivity. AirPlay, DLNA (server\/renderer), Roon endpoint, and MPD support. Unlimited-capacity Micro SD card slot for local music library storage and playback. Hotspot mode for environments that don't support tethering. Rechargeable LiPo battery (2,200mAh) for up to 9 hours of playback from a 4-hour charge. Both Poly and Mojo can be charged simultaneously. Supports all major file formats including FLAC, WAV, AIFF, ALAC, OGG, WMA, AAC, and MP3. PCM up to 768kHz and DSD64 to DSD256 via DoP. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eChord Mojo owners who want to add wireless streaming, SD card storage, and Roon endpoint capability to their portable DAC, turning a headphone amplifier into a complete portable music system.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Poly streaming module\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePortable streaming and storage module (pairs with Chord Mojo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless\u003c\/td\u003e\n\u003ctd\u003eWi-Fi 2.4GHz, Bluetooth 4.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocols\u003c\/td\u003e\n\u003ctd\u003eAirPlay, DLNA (server\/renderer), Roon endpoint, MPD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eMicro SD (unlimited capacity)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003eUp to 768kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eDSD64 - DSD256 via DoP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003eLiPo 2,200mAh, up to 9 hours, 4-hour charge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e50 x 62 x 22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e91g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Default Title","offer_id":42723508453533,"sku":"","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/Poly-Lifestyle-900x675.jpg?v=1660251343"},{"product_id":"chord-hugo2","title":"Chord Hugo2","description":"\u003cp\u003eThe Chord Electronics Hugo 2 is a portable and desktop DAC and headphone amplifier that brought the FPGA-based WTA filtering of the flagship Hugo to a smaller, battery-powered chassis, and became a What Hi-Fi? Product of the Year 2017 in the process. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003ePortable and desktop DAC and headphone amplifier, Class A solid-state. Xilinx Artix 7 FPGA with 49,152-tap 10-element Pulse Array WTA filter. PCM up to 768kHz\/32-bit and DSD64 to DSD512 native. Four user-selectable digital filters. Three-stage digital crossfeed for headphone listening. Bluetooth with aptX. Inputs: Micro USB (up to 768kHz), 3.5mm coaxial\/dual-data (up to 768kHz), optical (up to 96kHz). Outputs: 6.35mm and 3.5mm headphone jacks, stereo RCA line outputs. Battery: 8 hours playback. Remote control included. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eModular Expansion\u003c\/h3\u003e\n\u003cp\u003eThe Hugo 2 becomes a desktop streaming hub when paired with the \u003ca href=\"\/products\/chord-2go\"\u003eChord 2go\u003c\/a\u003e wireless module, adding Roon Ready streaming, Tidal, Qobuz, AirPlay, and up to 4TB of Micro SD storage. The \u003ca href=\"\/products\/chord-2yu\"\u003eChord 2yu\u003c\/a\u003e adds digital outputs so the Hugo 2 can serve as a streaming transport for an external DAC. Both dock directly to the Hugo 2 without cables.\u003c\/p\u003e\n\n\u003ch3\u003eUpgrade Path\u003c\/h3\u003e\n\u003cp\u003eThe Hugo 2's dual BNC inputs accept the \u003ca href=\"\/products\/chord-hugo-m-scaler\"\u003eChord Hugo M Scaler\u003c\/a\u003e at 768kHz, the single most impactful upgrade for any Hugo 2 owner, delivering a dramatic improvement in spatial resolution and naturalness from standard CD-resolution files. The Hugo 2 can also dock with the Chord Suzi power amplifier to create a complete integrated streaming system.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eWide, spacious, and remarkably transparent for a portable device. The 49,152-tap filter delivers accurate timing and three-dimensional staging. Four filter options allow customization from neutral and incisive to warm and smooth character.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined aluminium with polycarbonate buttons and glass viewing portal. Available in Silver or Satin Black.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Hugo 2 portable DAC\/headphone amp\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003eCharging cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePortable and desktop DAC and headphone amplifier, Class A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFPGA\u003c\/td\u003e\n\u003ctd\u003eXilinx Artix 7, 49,152-tap 10-element Pulse Array WTA filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003e126 dB A-weighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003eLess than 0.0001% at 1kHz \/ 3V RMS \/ 300 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (1% THD)\u003c\/td\u003e\n\u003ctd\u003e94mW \/ 300 ohms, 740mW \/ 32 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003e0.025 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003e44.1kHz - 768kHz, 16-32bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eDSD64 - DSD512 native\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery life\u003c\/td\u003e\n\u003ctd\u003e8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e21 x 100 x 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e365g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Black","offer_id":42726728269981,"sku":"","price":2175.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42726728302749,"sku":"","price":2175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/Hugo-2-Black-900x675.jpg?v=1660309863"},{"product_id":"chord-qutest","title":"Chord Qutest","description":"\u003cp\u003eThe Chord Electronics Qutest is the pure standalone DAC of the Chord lineup, no headphone amplifier, no battery, no compromise. Built from the same FPGA technology as the Hugo 2 in a precision-machined aircraft-grade aluminium chassis designed specifically for desktop and home audio use. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop DAC, Class A solid-state output stage. Xilinx Artix 7 FPGA with 49,152-tap 10-element Pulse Array WTA filter, the same digital technology as the \u003ca href=\"\/products\/chord-hugo2\"\u003eChord Hugo 2\u003c\/a\u003e. PCM up to 768kHz\/32-bit and DSD64 to DSD512 native. Four user-selectable digital filters. Galvanically isolated USB-B input. Inputs: USB Type-B (up to 768kHz), 2x BNC coaxial (up to 384kHz, or 768kHz in dual-data mode), optical (up to 96kHz). Output: stereo RCA pair. User-selectable output voltage: 1V, 2V, or 3V RMS. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe Qutest makes an immediately apparent difference in any system it enters, the 49,152-tap WTA filter recovers timing and spatial information from digital recordings with an accuracy that most DACs cannot match. The Class A output stage has essentially no noise floor modulation. Channel separation is 138dB at 1kHz. The three selectable output voltages make it easy to match gain with any connected amplifier or preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined from solid aircraft-grade aluminium billet with a polycarbonate button and glass viewing portal. Jett Black only. Powered by a 5V 2A Micro USB supply. Compatible with the Chord Qutest stand system (QSS) for stacking with the \u003ca href=\"\/products\/chord-anni\"\u003eChord Anni\u003c\/a\u003e and \u003ca href=\"\/products\/chord-huei\"\u003eChord Huei\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eUpgrade Path\u003c\/h3\u003e\n\u003cp\u003eThe Qutest's dual BNC inputs accept the output of the \u003ca href=\"\/products\/chord-hugo-m-scaler\"\u003eChord Hugo M Scaler\u003c\/a\u003e at up to 768kHz, the M Scaler is the single most impactful upgrade available for a Qutest-based system, dramatically improving resolution and spatial presentation from standard CD-resolution files.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eHome and desktop audiophiles who want the Chord FPGA DAC experience without a headphone amplifier, particularly as a source for the \u003ca href=\"\/products\/chord-anni\"\u003eChord Anni\u003c\/a\u003e or a high-end integrated amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Qutest DAC\u003c\/li\u003e\n\u003cli\u003e5V Micro USB power supply\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop DAC, Class A solid-state output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFPGA\u003c\/td\u003e\n\u003ctd\u003eXilinx Artix 7, 49,152-tap 10-element Pulse Array WTA filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003eLess than 0.0001% at 1kHz \/ 3V RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel separation\u003c\/td\u003e\n\u003ctd\u003e138 dB at 1kHz \/ 300 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003e44.1kHz - 768kHz, 16-32bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eDSD64 - DSD512 native\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eUSB Type-B, 2x BNC coax (single or dual-data), optical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eStereo RCA pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput voltage\u003c\/td\u003e\n\u003ctd\u003e1V, 2V, or 3V RMS selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e45 x 160 x 88 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e770g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Default Title","offer_id":42727440679069,"sku":"","price":1625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/Qutest-Front-1-900x675.jpg?v=1660319655"},{"product_id":"chord-anni","title":"Chord Anni","description":"\u003cp\u003eThe Chord Electronics Anni is the company's first desktop integrated amplifier, a compact, beautifully machined component that drives both headphones and loudspeakers using Chord's proprietary ULTIMA dual feed-forward error-correction topology, designed to sit alongside the \u003ca href=\"\/products\/chord-qutest\"\u003eChord Qutest\u003c\/a\u003e DAC and \u003ca href=\"\/products\/chord-huei\"\u003eChord Huei\u003c\/a\u003e phono stage as a complete desktop system. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop integrated amplifier, solid-state. ULTIMA dual feed-forward error-correction circuit topology. 10W output power. Two line-level inputs. Headphone outputs: 3.5mm and 6.35mm (both active simultaneously for two-listener use). Loudspeaker outputs: 4mm banana binding posts. Two-stage gain control for loudspeakers. Front-panel volume control doubles as input selector. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003ePrecise, dynamic, and tonally honest in the Chord tradition. The ULTIMA topology delivers an exceptionally low noise floor and fast transient response. Whether driving headphones or a pair of desktop monitors, the presentation is controlled and detailed with excellent imaging precision.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined aircraft-grade aluminium billet. Compact at 160 x 42.5 x 96.6mm and 625g, purpose-built for desktop use. The Qutest stand system (QSS) provides a matching equipment rack for the full \u003ca href=\"\/products\/chord-qutest\"\u003eChord Qutest\u003c\/a\u003e family.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eDesktop listeners who want a single Chord Electronics component to drive both headphones and compact loudspeakers, particularly as part of a complete system with the \u003ca href=\"\/products\/chord-qutest\"\u003eChord Qutest\u003c\/a\u003e DAC and \u003ca href=\"\/products\/chord-huei\"\u003eChord Huei\u003c\/a\u003e phono stage.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Anni desktop integrated amplifier\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop integrated amplifier, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTopology\u003c\/td\u003e\n\u003ctd\u003eULTIMA dual feed-forward error correction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\u003ctd\u003e10W into 8 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003e0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003e-92 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise floor\u003c\/td\u003e\n\u003ctd\u003e-110 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e5 Hz - 60 kHz (-3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e2x line-level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e3.5mm and 6.35mm (simultaneous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker outputs\u003c\/td\u003e\n\u003ctd\u003e4mm banana binding posts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e160 x 42.5 x 96.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e625g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Default Title","offer_id":42727456637085,"sku":"","price":2205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/CHORD_ANNI_17238-900x675.jpg?v=1660320174"},{"product_id":"chord-hugo-tt2","title":"Chord Hugo TT2","description":"\u003cp\u003eThe Chord Electronics Hugo TT 2 is the reference desktop DAC and headphone amplifier, built around a Xilinx Artix 7 FPGA running 98,304-tap WTA filtering, six super capacitors for linear peak power delivery, and a new discrete high-power output stage that makes the Hugo TT 2 a complete reference source and headphone amplifier in a single chassis. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference desktop DAC, headphone amplifier, and preamplifier, solid-state. Xilinx Artix 7 FPGA with 86x 208MHz cores running a 16FS WTA 1 filter at 98,304 taps, double the tap count of the Hugo 2. 10-element noise-shaping design. Second-order noise-shaping between DAC output and filter for dramatically reduced distortion. Six super capacitors delivering 5A peak at 9.3V RMS for linear dynamic current. PCM support: 44.1kHz to 768kHz, 16-32bit. DSD support: DSD64 to DSD512 (native via Windows, DoP otherwise). Four user-selectable digital filters. Three-stage digital crossfeed for headphone listening. Bluetooth input. 1x USB Type-B, 2x coaxial BNC, 2x optical digital inputs. Stereo XLR and RCA line outputs. 2x 6.35mm and 1x 3.5mm headphone outputs. 2x DX BNC expansion outputs for M Scaler connection. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eVast, precise, and technically beyond what most listeners have heard from a digital source before the Hugo TT 2 arrived in their chain. The 98,304-tap filter recovers timing information from digital recordings with a level of accuracy that meaningfully improves the perception of space, depth, and micro-detail. The super capacitor power supply delivers the instantaneous current that musical transients demand without the sag or compression that characterizes battery and conventional capacitor-based designs. The Hugo TT 2 is only eclipsed in Chord's lineup by the DAVE.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined aluminium casing with steel ball bearing buttons, gloss black acrylic signal window, glass viewing portal, and dot matrix display. Available in Silver or Satin Black. Upgradeable with the Chord M Scaler for 1M-tap upscaling via the DX BNC expansion outputs.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eSerious audiophiles who want Chord's most accomplished desktop DAC and headphone amplifier, and those building a reference digital source system with the optional M Scaler upscaler.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Hugo TT 2 DAC\/headphone amplifier\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference desktop DAC, headphone amplifier, and preamplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFPGA\u003c\/td\u003e\n\u003ctd\u003eXilinx Artix 7, 98,304-tap 16FS WTA 1 filter, 10-element design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003e44.1kHz - 768kHz, 16-32bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eDSD64 - DSD512\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e127 dB A-weighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD (headphone)\u003c\/td\u003e\n\u003ctd\u003e0.00008% at 2.5V \/ 300 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (unbalanced)\u003c\/td\u003e\n\u003ctd\u003e288mW RMS \/ 300 ohms, 7.3W RMS \/ 8 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (balanced)\u003c\/td\u003e\n\u003ctd\u003e1.15W RMS \/ 300 ohms, 18W RMS \/ 8 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003e0.042 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003e1x USB Type-B, 2x coaxial BNC, 2x optical, Bluetooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eStereo XLR, stereo RCA, 2x 6.35mm HP, 1x 3.5mm HP, 2x DX BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e52 x 235 x 238 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.53 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Black","offer_id":42727566344349,"sku":"","price":5100.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42727566377117,"sku":"","price":5100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/Hugo-TT-2.jpg?v=1660321453"},{"product_id":"chord-hugo-m-scaler","title":"Chord Hugo M Scaler","description":"\u003cp\u003eThe Chord Electronics Hugo M Scaler is the world's most advanced digital upscaler, a standalone component that uses Rob Watts' proprietary 1,015,808-tap WTA filtering technology to upscale standard 44.1kHz PCM audio up to 705.6kHz, dramatically improving the timing accuracy and perceived resolution of any DAC it is connected to. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDigital upscaler. Xilinx XC7A200T FPGA running a 1,015,808-tap WTA filter. Upscales standard 44.1kHz audio up to 705.6kHz; upscales to 768kHz from 96kHz input when connected via dual BNC to a compatible Chord DAC: \u003ca href=\"\/products\/chord-qutest\"\u003eChord Qutest\u003c\/a\u003e, \u003ca href=\"\/products\/chord-hugo2\"\u003eChord Hugo 2\u003c\/a\u003e, \u003ca href=\"\/products\/chord-hugo-tt2\"\u003eChord Hugo TT 2\u003c\/a\u003e, or \u003ca href=\"\/products\/chord-dave\"\u003eChord DAVE\u003c\/a\u003e. Inputs: galvanically isolated USB Type-B, 2x coaxial BNC, 2x optical. Outputs: dual BNC (for max 768kHz to compatible Chord DACs), 1x BNC S\/PDIF, 1x optical. Made in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe M Scaler's effect is consistently described as a significant and immediately audible improvement in space, depth, and timing, the 1,015,808-tap filter recovers timing information with a level of accuracy that no other upscaler approaches.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eCompact TT-series form factor at 40 x 235 x 238mm, designed to stack with the \u003ca href=\"\/products\/chord-hugo-tt2\"\u003eHugo TT 2\u003c\/a\u003e. 2.55kg.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eOwners of the \u003ca href=\"\/products\/chord-hugo-tt2\"\u003eHugo TT 2\u003c\/a\u003e and \u003ca href=\"\/products\/chord-dave\"\u003eDAVE\u003c\/a\u003e who want to realize the full potential of their DAC via the dual BNC 768kHz connection, the single most impactful upgrade for a Chord TT 2 or DAVE system. Also transforms a \u003ca href=\"\/products\/chord-qutest\"\u003eQutest\u003c\/a\u003e or \u003ca href=\"\/products\/chord-hugo2\"\u003eHugo 2\u003c\/a\u003e into a reference-level source.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChord Hugo M Scaler digital upscaler\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDigital upscaler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFPGA\u003c\/td\u003e\n\u003ctd\u003eXilinx XC7A200T, 1,015,808-tap WTA filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output sample rate\u003c\/td\u003e\n\u003ctd\u003e705.6kHz (single BNC), 768kHz (dual BNC to compatible Chord DACs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eGalvanically isolated USB Type-B, 2x coaxial BNC, 2x optical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital outputs\u003c\/td\u003e\n\u003ctd\u003eDual BNC (768kHz), 1x BNC S\/PDIF, 1x optical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003e44.1kHz - 768kHz, 16-32bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e40 x 235 x 238 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.55 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chord","offers":[{"title":"Black","offer_id":42727593541789,"sku":"","price":4650.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42727593574557,"sku":"","price":4650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/M-Scaler-L-Front-900x675.jpg?v=1660321876"},{"product_id":"gustard-x26-iii","title":"GUSTARD X26 III Dual ES9039SPRO","description":"\u003cp\u003eThe Gustard X26 III is a dual-flagship DAC and network streamer, pairing two ES9039SPRO chips in a fully balanced mono architecture with Roon-ready network streaming, an in-house FPGA signal processing stage, and Gustard's proprietary ACSS (Active Current Signal Source) output for direct current-mode connection to compatible amplifiers.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference DAC and network streamer. Dual ESS ES9039SPRO chips in true balanced mono configuration. FPGA-based in-house signal processing. ACSS (Active Current Signal Source) output for current-mode connection alongside standard balanced XLR and unbalanced RCA outputs. Network streaming: Roon Ready (Roon Bridge), AirPlay, UPnP, NAA, Spotify Connect. LAN input supporting 100\/1000Mbps with web-based configuration. Optional 10M clock BNC input for external master clock synchronization. USB, coaxial, optical, AES\/EBU, and I2S digital inputs. PCM up to 32-bit\/768kHz; DSD512 native. Remote control included.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eTechnically accomplished, detailed, and dynamically capable, the dual mono ES9039SPRO configuration delivers strong channel separation and a wide, stable stereo image. The ACSS current output provides an alternative signal path for those with compatible amplifiers, and the integrated network streaming makes the X26 III a convenient one-box source for high-resolution library and streaming playback.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eFull-width aluminum chassis with a clean, modern front panel. Frequency response flat from 20Hz to 20kHz within +\/-0.3dB. Remote control included. Available in black.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want a premium delta-sigma DAC with built-in Roon-ready streaming, ACSS output capability, and extensive digital input connectivity in a single chassis.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGustard X26 III DAC\/streamer\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference DAC and network streamer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chips\u003c\/td\u003e\n\u003ctd\u003e2x ESS ES9039SPRO (dual mono)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003eUp to 32-bit \/ 768kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eDSD512 native\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eUSB, coaxial, optical, AES\/EBU, I2S, LAN (100\/1000Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA, ACSS (current output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20 Hz - 20 kHz (+\/-0.3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork protocols\u003c\/td\u003e\n\u003ctd\u003eRoon Ready, AirPlay, UPnP, NAA, Spotify Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClock input\u003c\/td\u003e\n\u003ctd\u003e10M BNC (optional external master clock)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Gustard","offers":[{"title":"Black","offer_id":42734571552925,"sku":"","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42734571585693,"sku":"","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/1-1_cec99a1e-1550-459b-b75a-565cbf322481.jpg?v=1737303135"},{"product_id":"cayin-ha-6a","title":"Cayin HA-6A MK2","description":"\u003cp\u003eThe Cayin HA-6A MK2 is the second-generation evolution of Cayin's acclaimed EL34 tube headphone amplifier, now upgraded with a dual-chassis design, KT88 output tubes as standard, a 4.4mm Pentaconn balanced output, remote control, and significantly higher output power. The fundamental character remains: selectable Triode and Ultralinear modes, comprehensive tube rolling compatibility, and Cayin's hallmark musicality. Now more powerful, quieter, and more versatile than ever.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop headphone amplifier and preamplifier, single-ended Class A vacuum tube. Dual-chassis design with a physically separated power supply to minimize magnetic interference and lower the noise floor. Genalex KT88 output tubes as standard (broad compatibility: EL34, 6550, KT66, KT150, and more). JJ ECC82\/12AU7 voltage amplification and JJ GZ34\/5AR4 rectification. Selectable Triode and Ultralinear modes via front-panel switch, switchable on the fly without powering down. Three impedance settings (Low, Mid, High) for headphones from sensitive IEMs to demanding planars. Fully point-to-point hand-wired signal path with silver-plated signal wiring. In-house designed custom toroidal power transformer and wide-bandwidth EI output transformers. 60-second soft start. Remote control for volume and mute. RCA preamp output for use as a tube preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eWarm, dimensional, and tonally rich in Triode mode, KT88 output tubes deliver a slightly fuller low-frequency foundation and wider dynamic range than the original EL34 configuration, while retaining the smooth, holographic midrange that defines the HA-6A character. Ultralinear mode tightens the presentation and adds grip and energy for more demanding headphones. The dual-chassis power supply produces a noticeably blacker background than the original, and tube rolling remains one of the most rewarding aspects of the platform.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eDual-chassis construction with a silver-plated copper umbilical cable connecting the amplifier and power supply enclosures. Analogue VU meters on the front panel. Removable protective tube cage. Premium aluminum alloy chassis with Cayin's characteristic fit and finish. Includes remote control and spare fuses.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eTube enthusiasts who want a highly configurable KT88\/EL34-family headphone amplifier with Triode\/Ultralinear flexibility, broad headphone compatibility from IEMs to planars, and a dual-chassis design that meaningfully improves noise performance over the original.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCayin HA-6A MK2 headphone amplifier chassis\u003c\/li\u003e\n\u003cli\u003eCayin HA-6A MK2 power supply chassis\u003c\/li\u003e\n\u003cli\u003eSilver-plated copper umbilical cable\u003c\/li\u003e\n\u003cli\u003eGenalex KT88 output tubes (matched pair)\u003c\/li\u003e\n\u003cli\u003eJJ ECC82 driver tubes (matched pair)\u003c\/li\u003e\n\u003cli\u003eJJ GZ34 rectifier tubes (pair)\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eSpare fuses\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop headphone amplifier and preamplifier, single-ended Class A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTopology\u003c\/td\u003e\n\u003ctd\u003eSingle-ended Class A, dual-chassis with external power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tubes (standard)\u003c\/td\u003e\n\u003ctd\u003eGenalex Gold Lion KT88 (compatible: EL34, 6550, KT66, KT150, and more)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver tubes\u003c\/td\u003e\n\u003ctd\u003eJJ ECC82 \/ 12AU7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tubes\u003c\/td\u003e\n\u003ctd\u003eJJ GZ34 \/ 5AR4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating modes\u003c\/td\u003e\n\u003ctd\u003eTriode, Ultralinear (front-panel selectable, on-the-fly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance settings\u003c\/td\u003e\n\u003ctd\u003eLow, Mid, High (3-stage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (4-pin XLR, UL)\u003c\/td\u003e\n\u003ctd\u003e4,500 mW per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (6.35mm, UL)\u003c\/td\u003e\n\u003ctd\u003e3,500 mW per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power (4.4mm, UL)\u003c\/td\u003e\n\u003ctd\u003e1,000 mW per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e4-pin XLR balanced, 4.4mm Pentaconn balanced, 6.35mm single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreamp output\u003c\/td\u003e\n\u003ctd\u003eRCA (for use as tube preamplifier)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePoint-to-point hand wiring, silver-plated signal wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoft start\u003c\/td\u003e\n\u003ctd\u003e60-second delayed mute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Cayin","offers":[{"title":"Black","offer_id":50046471602455,"sku":null,"price":2499.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53388170133783,"sku":null,"price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/HA-6AMK2Silver_8_1392x928_jpg.webp?v=1779161536"},{"product_id":"cayin-ha-1a-mk2","title":"Cayin HA-1A Mk2","description":"\u003cp\u003eThe Cayin HA-1A Mk2 is a revamp of one of Cayin's most celebrated tube headphone amplifiers, an EL84-based single-ended design with a new wooden chassis, five-step impedance matching, pre-out for speaker system integration, and the natural, unhyped musical character that has made the HA-1A series a long-standing favorite among tube headphone enthusiasts.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop headphone amplifier and preamplifier, single-ended vacuum tube. EL84EH output tubes in single-ended configuration. Tube complement: 12AU7 x2, EL84EH x2, 12DT5 x1. Five-step output impedance selection (8 to 600 ohms) for precise matching to virtually any headphone on the market. Two sets of Neutrik 6.35mm headphone outputs: Phone A (dynamic presentation) and Phone B (softer presentation). Pre-out for connection to active speakers or power amplifiers. Separate power supply to signal and voltage amplification stages, with power regulation tube providing further isolation. Two RCA inputs (CD, AUX).\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eNatural, musically delicate, and tonally balanced without excessive warmth or brightness, Cayin's description of the HA-1A sound has always been \"sincerely honest to the music.\" The EL84 delivers a lighter, more nimble character than larger output tubes, with excellent midrange transparency, smooth extended treble, and a presentation that engages rather than flatters. The five-step impedance selector is a practical and genuinely effective tool for optimizing the match to different headphones.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eSubstantial construction at 9.5kg, with the new Mk2's wooden chassis giving it a distinctly warm visual character. Silver finish. Innovative circuit layout and effective internal shielding throughout. Includes white handling gloves, user manual, power cord, and spare fuses.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want a versatile tube headphone amplifier with broad impedance compatibility, pre-out functionality, and the natural, non-fatiguing EL84 sound character, and those who value the ability to match the amp's output impedance to their specific headphones.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCayin HA-1A Mk2 headphone amplifier\u003c\/li\u003e\n\u003cli\u003eTubes (12AU7 x2, EL84EH x2, 12DT5 x1)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eWhite handling gloves\u003c\/li\u003e\n\u003cli\u003eSpare main power fuses (x2)\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop headphone amplifier and preamplifier, single-ended vacuum tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube complement\u003c\/td\u003e\n\u003ctd\u003e12AU7 x2, EL84EH x2, 12DT5 x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance selection\u003c\/td\u003e\n\u003ctd\u003e5 steps, 8 - 600 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e2x Neutrik 6.35mm (Phone A: dynamic, Phone B: soft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e2x RCA (CD, AUX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePre-out\u003c\/td\u003e\n\u003ctd\u003eYes (for active speakers or power amplifier)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e65W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e126.5 x 304 x 215 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Cayin","offers":[{"title":"Default Title","offer_id":42741298987165,"sku":"","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/HA-1AMK2._2_1024x1024_960x600_56ce2f05-2abc-48ab-8e2b-6c0f59428445.webp?v=1660602141"},{"product_id":"t-a-ha200","title":"T+A HA200","description":"\u003cp\u003eT+A's dedicated reference headphone amplifier, the HA 200 is a no-compromise amplification system designed to be the ideal partner for the Solitaire P, combining an analog amplifier, digital input stage, and DAC in a single chassis built to the standards of T+A's reference electronics. Made in Germany.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop reference headphone amplifier with integrated DAC and digital input stage. Fully discrete analog amplifier section with balanced circuitry throughout. Supports PCM up to 32-bit\/768kHz and DSD up to DSD512. Available in Black or Silver.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003eBalanced and single-ended headphone outputs, balanced XLR and single-ended RCA analog inputs, and comprehensive digital connectivity including USB, coaxial, and optical inputs. The amplifier topology is developed from T+A's loudspeaker amplifier engineering, bringing a level of output current capability and control that most dedicated headphone amplifiers cannot match.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eOwners of the T+A Solitaire P or P-SE seeking a matched reference amplification system, and audiophiles who want a single high-end component that handles both DAC and headphone amplification at reference level.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eT+A HA 200 headphone amplifier\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference headphone amplifier with integrated DAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC resolution\u003c\/td\u003e\n\u003ctd\u003ePCM up to 32-bit \/ 768kHz, DSD up to DSD512\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e4-pin XLR balanced, 6.35mm single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, single-ended RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eUSB, coaxial, optical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable finishes\u003c\/td\u003e\n\u003ctd\u003eBlack, Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"T+A","offers":[{"title":"Black","offer_id":42956030902429,"sku":"","price":10995.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":42956030935197,"sku":"","price":10995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/ha_200_slider_ha_200-1-1440x720.jpg?v=1663908565"},{"product_id":"warwick-aperio","title":"Warwick Aperio","description":"\u003cp\u003eWarwick Acoustics' reference statement system, the Aperio is an electrostatic headphone and matched energizer representing the pinnacle of the company's HPEL transducer technology, one of the finest and most technically distinctive headphone systems in the world. Current build lead time is approximately 16 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eOver-ear, open-back, electrostatic. High-Precision Electrostatic Laminate (HPEL) transducer, a proprietary electrostatic technology developed by Warwick Acoustics that achieves the speed and resolution of traditional electrostatics with a uniquely engineered diaphragm. Available in Silver, Black, or Gold finish.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eEffortless, transparent, and spatially captivating. The Aperio delivers the characteristic electrostatic advantages of near-zero moving mass and vanishingly low distortion in a presentation that is both technically breathtaking and musically immersive. Imaging is holographic, frequency extension is exceptional, and the overall character is refined and natural.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Comfort\u003c\/h3\u003e\n\u003cp\u003eHand-assembled in the UK to bespoke standards, with premium materials and finish options that reflect the Aperio's position at the absolute top of Warwick Acoustics' range. Each system is individually built and tested.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eSerious audiophiles seeking a reference electrostatic system with a uniquely engineered transducer and the craftsmanship standards of a bespoke British audio manufacturer.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWarwick Aperio electrostatic headphone\u003c\/li\u003e\n\u003cli\u003eDedicated Aperio energizer\/amplifier\u003c\/li\u003e\n\u003cli\u003eCables and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Current build lead time is approximately 16 weeks. Contact us to place your order.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eOver-ear, open-back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransducer type\u003c\/td\u003e\n\u003ctd\u003eElectrostatic (HPEL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable finishes\u003c\/td\u003e\n\u003ctd\u003eSilver ($32,000), Black ($36,000), Gold ($45,000)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild location\u003c\/td\u003e\n\u003ctd\u003eHandmade in the UK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Warwick","offers":[{"title":"Silver","offer_id":43010535162013,"sku":"","price":32000.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43010535194781,"sku":"","price":36000.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":43010535227549,"sku":"","price":45000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/warwick-aperio_09__87472.jpg?v=1665173931"},{"product_id":"warwick-bravura","title":"Warwick Bravura","description":"\u003cp\u003eWarwick Acoustics' more accessible HPEL electrostatic headphone, the Bravura brings the company's High-Precision Electrostatic Laminate transducer technology to a lower price point, available as a headphone alone or bundled with the Sonoma M1 electrostatic amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eOver-ear, open-back, electrostatic. High-Precision Electrostatic Laminate (HPEL) transducer, Warwick Acoustics' proprietary electrostatic driver technology, first developed for the Sonoma M1 system. Requires a compatible electrostatic energizer. Available with the Sonoma M1 amplifier or as a headphone-only option. Handmade in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eFast, detailed, and spatially precise in the way that only electrostatic transducers can achieve. The Bravura delivers excellent imaging, extended frequency response, and the low-distortion character of the HPEL technology in a more approachable package than the Aperio. Tonally balanced and non-fatiguing for extended listening.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Comfort\u003c\/h3\u003e\n\u003cp\u003ePremium construction with Warwick Acoustics' characteristic attention to build quality. Available in Black or Silver. Comfortable for extended sessions with well-designed earpads.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want to experience Warwick Acoustics' HPEL electrostatic technology without the investment of the Aperio, with the option to purchase the system complete or add their own compatible energizer.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWarwick Bravura electrostatic headphone\u003c\/li\u003e\n\u003cli\u003eSonoma M1 electrostatic amplifier (system variants only)\u003c\/li\u003e\n\u003cli\u003eCables\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eOver-ear, open-back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransducer type\u003c\/td\u003e\n\u003ctd\u003eElectrostatic (HPEL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild location\u003c\/td\u003e\n\u003ctd\u003eHandmade in the UK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable configurations\u003c\/td\u003e\n\u003ctd\u003eHeadphone only (Black $2,795 \/ Silver $2,395), with Sonoma M1 amp (Black $7,795 \/ Silver+Black $7,395+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Warwick","offers":[{"title":"Bravura Black Headphones","offer_id":43010642477213,"sku":"","price":2795.0,"currency_code":"USD","in_stock":true},{"title":"Sonoma M1 Amp Black","offer_id":43010642509981,"sku":"","price":5000.0,"currency_code":"USD","in_stock":true},{"title":"Bravura Black System (Headphones + Amp)","offer_id":43010642542749,"sku":"","price":7795.0,"currency_code":"USD","in_stock":true},{"title":"Bravura Silver Headphones","offer_id":43010642575517,"sku":"","price":2395.0,"currency_code":"USD","in_stock":true},{"title":"Sonoma M1 Amp Silver","offer_id":43010642608285,"sku":"","price":4600.0,"currency_code":"USD","in_stock":true},{"title":"Bravura Silver System (Headphones + Amp)","offer_id":43010642641053,"sku":"","price":6995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/warwick-bravura-black-main-02__98379.webp?v=1665175813"},{"product_id":"sw1x-dac-ii","title":"SW1X DAC II","description":"\u003cp\u003eThe SW1X DAC II steps up to the PCM56, widely regarded as one of the most refined and musical 16-bit R2R DACs ever manufactured, in a dual-mono NOS design with a more sophisticated power supply and a powerful 6N6P valve output stage. The result is a meaningfully more refined and nuanced presentation than the DAC I while retaining the same pure NOS philosophy of zero oversampling and zero digital filtering.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eNon-oversampling (NOS) R2R DAC with valve output stage. Dual PCM56P-K chips, considered among the finest-sounding 16-bit DACs ever created. Active I\/V conversion via a specially selected transistor with less than 10 ohm input impedance, connected directly to the tube grid for the shortest possible signal path. Class A, anode follower, zero negative feedback, single-ended valve amplification topology. 6N6P double triode output stage. Valve-rectified CLC choke-filtered B+ supply. Discrete transistor shunt regulated low voltage supplies. Only one decoupling capacitor per channel in the signal path. Circuit wired with specially selected copper conductors throughout. S\/PDIF coaxial input up to 24-bit\/96kHz (USB optional). Dual EI core mains transformers for split digital and analogue power supplies.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe PCM56 brings a step up in low-level resolution, midrange refinement, and musical presentation relative to the TDA1543 in the DAC I, more detail and air, without losing any of the tonal warmth and natural character that defines the SW1X DAC family. The anode follower topology and single decoupling capacitor per channel keeps the signal path elegantly simple and tonally honest.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eAvailable in STD and SPX versions (SPX includes film\/foil output decoupling capacitors, premium tube options). Hand-assembled with selected copper conductors. Optional extras include AN copper foil in oil decoupling capacitors, vintage NOS tube upgrades, and orient grain M6 EI core mains transformer. Specifications subject to change as SW1X research continues.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eDigital listeners who want a meaningful step up from the DAC I in resolution and refinement while maintaining the NOS R2R philosophy, and those who want to experience the PCM56 chip at its best in a proper valve output stage.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eNOS R2R DAC with valve output stage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chips\u003c\/td\u003e\n\u003ctd\u003e2x Burr-Brown PCM56P-K (one per channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tube\u003c\/td\u003e\n\u003ctd\u003e1x 6N6P (or 5687\/E182CC as option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tube\u003c\/td\u003e\n\u003ctd\u003e1x 6X5GT or 5Y3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTopology\u003c\/td\u003e\n\u003ctd\u003eClass A, zero NFB, anode follower, single-ended, NOS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eValve-rectified CLC choke-filtered B+; discrete transistor shunt regulated LV; dual mains transformers (digital\/analogue)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital input\u003c\/td\u003e\n\u003ctd\u003eCoaxial S\/PDIF up to 24-bit\/96kHz (USB optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003eLess than 1k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput noise (unweighted)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.5 mVrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption\u003c\/td\u003e\n\u003ctd\u003e18W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e140 x 350 x 410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e9.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SW1X","offers":[{"title":"SPX","offer_id":43013707268253,"sku":"","price":6050.0,"currency_code":"USD","in_stock":true},{"title":"SPX + USB","offer_id":43018333782173,"sku":"","price":7685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/C78I1223-scaled.jpg?v=1665195840"},{"product_id":"sw1x-dac-ii-balanced","title":"SW1X DAC II Balanced","description":"\u003cp\u003eThe SW1X DAC II Balanced takes the PCM56-based DAC II platform to its highest expression by adding an EL84 power tube output stage coupled through signal output transformers, delivering true balanced XLR and single-ended RCA outputs simultaneously, and a substantial step up in transparency and spatial presentation over the STD and SPX versions.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eNon-oversampling (NOS) R2R DAC with transformer-coupled balanced valve output stage. Dual PCM56 R2R DAC chips. EL84 power tubes in triode connection, zero negative feedback, Class A, valve output stage, driven by 6N6P or 5687 double triode. SW1X copper-wound Super HiB DC core signal output transformers providing simultaneous balanced XLR and single-ended RCA outputs. Directly heated 5U4GYB\/5R4GYB valve-rectified CLC choke-filtered B+ supply. Discrete transistor shunt regulated LV supplies. AN copper foil in oil interstage signal decoupling capacitors. S\/PDIF digital input up to 24-bit\/96kHz. Available in Balanced, Balanced Classic, and Balanced Signature versions with progressive transformer quality upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe addition of the EL84 output stage and output transformers introduces a level of transparency and three-dimensionality that the direct-output SPX version cannot match, the signal output transformer removes the output stage from direct contact with the load, allowing a purer coupling between the valve and the downstream component. True balanced output provides improved channel separation and noise rejection. The result is a DAC that sits at the boundary between analogue and digital in its character.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eSubstantially larger than the DAC II at 150 x 450 x 410mm and 17kg, reflecting the more extensive transformer and power supply complement. Optional upgrades include hardwired Bakelite board output stage, fine silver wiring, Black Gate VK B+ capacitors, SW1X silver-wound signal output transformers, and Super HiB double C-core mains transformers.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eListeners who want the DAC II's PCM56 character with balanced outputs for a fully balanced system, and those who want to explore the additional transparency that transformer-coupled valve output stages provide over direct-coupled designs.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eNOS R2R DAC with transformer-coupled balanced valve output stage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chips\u003c\/td\u003e\n\u003ctd\u003e2x Burr-Brown PCM56 (one per channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tubes\u003c\/td\u003e\n\u003ctd\u003e2x EL84 (triode connected); 1x 6N6P or 5687 driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tube\u003c\/td\u003e\n\u003ctd\u003e1x 5U4GYB or 5R4GYB (directly heated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA (simultaneous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eDHT valve-rectified CLC choke-filtered B+; discrete transistor shunt regulated LV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital input\u003c\/td\u003e\n\u003ctd\u003eS\/PDIF coaxial up to 24-bit\/96kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003eLess than 100 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput noise (unweighted)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.5 mVrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption\u003c\/td\u003e\n\u003ctd\u003e23W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e150 x 450 x 410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e17 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SW1X","offers":[{"title":"Default Title","offer_id":47989222998295,"sku":"","price":10825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/C78I0484-scaled.jpg?v=1665266029"},{"product_id":"sw1x-dac-iii","title":"SW1X DAC III","description":"\u003cp\u003eThe SW1X DAC III is built around the legendary Philips TDA1541, the chip that audiophiles have been describing as \"the most analogue-sounding DAC ever made\" for four decades, in a NOS design that adds an asynchronous valve clock for the TDA1541's Dynamic Element Matching circuit, a further refinement that elevates the chip's already exceptional performance to a new level of organic, three-dimensional presentation.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eNon-oversampling (NOS) R2R DAC with valve output stage and valve-clocked DEM. TDA1541 R2R DAC chip, the most analogue-sounding R2R converter ever made. Asynchronous E180F valve clock powers the TDA1541's Dynamic Element Matching (DEM) circuit, with EAA91 valve-rectified power supply for the clock stage. Active I\/V conversion via a single specially selected transistor directly connected to the tube grid for the shortest possible signal path. Class A, anode follower, zero negative feedback, single-ended RC valve amplification topology. 6N6P or 5687 double triode output stage. Valve-rectified CLC choke-filtered power supply. Three EI core mains transformers for separate digital and analogue supplies. S\/PDIF coaxial input up to 24-bit\/96kHz (USB optional). Available in STD\/SPX and Balanced versions.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe TDA1541 takes the organic, musical character of the SW1X DAC line to a different level, the chip's depth of soundstage, timbral accuracy, and natural dynamic envelope give recordings a sense of physical presence that few digital sources approach. The valve DEM clock eliminates the digital artifacts that arise from the TDA1541's clocking circuit, producing a presentation that is frequently described as indistinguishable from analogue playback with a well-matched digital transport.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eAvailable in STD (340 x 400mm, 13.6kg) and a larger Custom version with USB module (440 x 400mm, 15.6kg). Optional upgrades include AN copper foil in oil capacitors, Black Gate decoupling capacitors for TDA1541, premium vintage tube options including TDA1541R selected and TDA1541A S1\/S2 crown versions.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eSerious digital listeners who want the TDA1541's legendary analogue character in a properly implemented valve output stage, with the unique addition of a valve-clocked DEM circuit for the most faithful realization of the chip's capabilities.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eNOS R2R DAC with valve output stage and valve-clocked DEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chip\u003c\/td\u003e\n\u003ctd\u003ePhilips TDA1541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tube\u003c\/td\u003e\n\u003ctd\u003e1x 6N6P or 5687\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDEM clock tube\u003c\/td\u003e\n\u003ctd\u003e1x E180F (asynchronous); 1x EAA91 rectifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tube\u003c\/td\u003e\n\u003ctd\u003e1x 6X5 or 5Y3 (5R4 as option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTopology\u003c\/td\u003e\n\u003ctd\u003eClass A, zero NFB, anode follower, single-ended, NOS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital input\u003c\/td\u003e\n\u003ctd\u003eS\/PDIF coaxial up to 24-bit\/96kHz (USB optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003eLess than 1k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput noise (unweighted)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.5 mVrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption\u003c\/td\u003e\n\u003ctd\u003e33W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions STD (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e150 x 340 x 400 mm \/ 13.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions Custom + USB (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e150 x 440 x 400 mm \/ 15.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SW1X","offers":[{"title":"SPX","offer_id":43013880676509,"sku":"","price":9175.0,"currency_code":"USD","in_stock":true},{"title":"SPX + USB","offer_id":43018338926749,"sku":"","price":12395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/C78I1626-scaled.jpg?v=1665267245"},{"product_id":"sw1x-dac-iii-balanced","title":"SW1X DAC III Balanced","description":"\u003cp\u003eThe SW1X DAC III Balanced is the TDA1541-based DAC III at its most transparent and complete, sharing the valve-clocked DEM architecture of the DAC III but elevating it with an EL84 transformer-coupled output stage that delivers simultaneous balanced XLR and single-ended RCA outputs, and a directly heated rectifier tube in a more sophisticated power supply. The smaller sibling to the DAC IV.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eNon-oversampling (NOS) R2R DAC with transformer-coupled balanced valve output stage and valve-clocked DEM. TDA1541 R2R DAC chip. Passive I\/V conversion via a specially selected resistor directly connected to the tube grid. Valve-clocked Dynamic Element Matching powered by an asynchronous valve clock with valve-rectified and choke-filtered power supply. EL84 power tubes in triode connection, zero negative feedback, Class A, driven by 6N6P double triode. SW1X copper-wound Super HiB DC core signal output transformers for simultaneous balanced XLR and single-ended RCA output. Directly heated 5U4GYB\/5R4GYB valve-rectified CLC choke-filtered B+ supply. Discrete transistor shunt regulated LV supplies. AN copper foil in oil interstage decoupling capacitors. Black Gate decoupling capacitors for TDA1541. S\/PDIF coaxial input up to 24-bit\/96kHz. Available in Balanced, Balanced Classic, and Balanced Signature versions.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eCombines the TDA1541's legendary analogue presentation with the additional transparency and three-dimensionality of transformer-coupled output, a significant step beyond the SPX version in spatial resolution and low-level nuance. The passive I\/V conversion used in the Balanced differs from the active I\/V of the STD version, providing yet another flavor of the TDA1541's inherent character.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003e150 x 450 x 410mm at 18kg. Available in three transformer quality levels: Balanced (M6 EI core OPTs), Balanced Classic (copper and silver Super HiB double C core OPTs), and Balanced Signature (all-silver Super HiB double C core OPTs with hardwired Bakelite board output stage).\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eListeners who want the TDA1541 in its most complete and transparent implementation with true balanced outputs, as a stepping stone toward the DAC IV, or as an endpoint for those who want the full transformer-coupled TDA1541 experience without the directly heated DHD power supply of the flagship.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eNOS R2R DAC, transformer-coupled balanced valve output, valve-clocked DEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chip\u003c\/td\u003e\n\u003ctd\u003ePhilips TDA1541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tubes\u003c\/td\u003e\n\u003ctd\u003e2x EL84 (triode connected); 1x 6N6P driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDEM clock\u003c\/td\u003e\n\u003ctd\u003eAsynchronous valve clock with valve-rectified choke-filtered supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tube\u003c\/td\u003e\n\u003ctd\u003e1x 5U4GYB or 5R4GYB (directly heated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA (simultaneous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital input\u003c\/td\u003e\n\u003ctd\u003eS\/PDIF coaxial up to 24-bit\/96kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003eLess than 100 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput noise (unweighted)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.5 mVrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption\u003c\/td\u003e\n\u003ctd\u003e23W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e150 x 450 x 410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e18 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SW1X","offers":[{"title":"Balanced","offer_id":43013943951517,"sku":"","price":15950.0,"currency_code":"USD","in_stock":true},{"title":"Balanced Special","offer_id":43018341712029,"sku":"","price":18325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/C78I9449-scaled.jpg?v=1665268120"},{"product_id":"sw1x-dac-i","title":"SW1X DAC I SPX","description":"\u003cp\u003eThe SW1X DAC I SPX is the entry point to SW1X Audio Design's NOS R2R DAC lineup, a non-oversampling, zero digital filter design built around the Philips TDA1543 chip and a 6N6P valve output stage, with a choke-filtered power supply that elevates it meaningfully above the standard DAC I. Musical, organic, and analogue in character from the first note.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eNon-oversampling (NOS) R2R DAC with valve output stage. TDA1543 DAC chip, one of the most musical and purist converters ever produced, directly connected to the CS8414 S\/PDIF receiver with the shortest possible signal path. Class A, single-ended, anode follower, zero negative feedback RC valve amplification topology. 6N6P double triode output stage. Valve-rectified CLC choke-filtered HV power supply (6X5GT or 5Y3). Discrete transistor shunt voltage regulated low voltage supplies. Circuit wired with specially selected copper conductors. Coaxial S\/PDIF input supporting up to 24-bit\/96kHz (USB optional).\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe TDA1543 has a particular warmth and musicality that delta-sigma DAC chips cannot replicate, a quality that comes from its fully resistive ladder network and the absence of oversampling or digital filtering. The SPX version's choke-filtered power supply extends this natural character, adding body and refinement that the standard DAC I's simpler supply cannot match. For listeners who find modern high-resolution DACs clinical or fatiguing, the DAC I SPX is often a revelation.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eCompact at 130 x 335 x 400mm and 10.3kg. Hand-assembled with SW1X's selected copper conductors of specified geometry throughout the signal path. All specifications subject to change as SW1X's ongoing research and development continues.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eDigital listeners who want to experience the natural, analogue character of the TDA1543 NOS DAC topology in a well-engineered valve output stage, as an entry into the SW1X DAC ecosystem or as a standalone musical digital source.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eNOS R2R DAC with valve output stage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chip\u003c\/td\u003e\n\u003ctd\u003ePhilips TDA1543\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tube\u003c\/td\u003e\n\u003ctd\u003e1x 6N6P double triode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tube\u003c\/td\u003e\n\u003ctd\u003e1x 6X5GT or 5Y3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTopology\u003c\/td\u003e\n\u003ctd\u003eClass A, zero NFB, anode follower, single-ended, NOS (no digital filtering)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eValve-rectified CLC choke-filtered HV; discrete transistor shunt regulated LV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital input\u003c\/td\u003e\n\u003ctd\u003eCoaxial S\/PDIF up to 24-bit\/96kHz (USB optional add-on)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003eLess than 1k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput noise (unweighted)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.5 mVrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption\u003c\/td\u003e\n\u003ctd\u003e15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e130 x 335 x 400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SW1X","offers":[{"title":"SPX","offer_id":43018328440989,"sku":"","price":4375.0,"currency_code":"USD","in_stock":true},{"title":"SPX + USB Module","offer_id":43018328473757,"sku":"","price":5875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/C78I1140-scaled.jpg?v=1665316884"},{"product_id":"sw1x-dac-iv","title":"SW1X DAC IV","description":"\u003cp\u003eThe SW1X DAC IV is the reference statement of the SW1X DAC lineup, a single-chassis TDA1541-based NOS design that adds directly heated diode (DHD) rectification to the power supply, a power output valve output stage, and a quasi dual-mono architecture, producing what SW1X describes as the most dynamic DAC currently in production: a presentation of scale, presence, and dynamic authority that no other topology in the lineup can match.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eNon-oversampling (NOS) R2R DAC with directly heated diode power supply and power output valve stage. TDA1541 R2R DAC chip. Directly heated diode (DHD) tube-rectified, 2x choke-filtered, quasi dual-mono B+ power supply, the most sophisticated power delivery in the SW1X lineup. Anode choke-loaded or signal output transformer-decoupled, zero negative feedback, triode valve output stage. SW1X custom-designed copper-wound Super HiB DC core chokes or signal output transformers. Discrete transistor shunt regulated low voltage supplies. S\/PDIF coaxial input up to 24-bit\/96kHz (optional up to 48kHz purist Red Book mode). Orient grain M6 EI core mains transformers and chokes. Tube complement: 1x 6SN7 or 2x 6J5, 2x 6V6 or 2x 6F6, 1x 5U4G.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eTransient response and dynamic scale that set the DAC IV apart from everything below it in the SW1X lineup, music is presented with a visceral impact and dimensional realism that makes vocalist and instrument placement feel uncomfortably, wonderfully physical. In the right system the illusion of performers in the room is strong enough to be startling. The DHD power supply removes the last vestiges of solid-state character from the power delivery, and the larger power output valves provide the current delivery for those dynamics.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eThe largest and heaviest SW1X DAC at 250 x 450 x 410mm and 20kg, the single-chassis design houses everything in one enclosure with shorter signal paths despite the challenge of isolating the power supply magnetically. Signature versions with silver-wound OPTs available on a custom built-to-order basis. Specifications subject to ongoing SW1X research and development.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eSerious digital listeners who want the most dynamically alive, organically musical NOS R2R DAC available, the reference endpoint of the SW1X DAC ecosystem for those who have heard the DAC III and want more of everything.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eNOS R2R DAC with DHD power supply and power output valve stage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chip\u003c\/td\u003e\n\u003ctd\u003ePhilips TDA1541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tubes\u003c\/td\u003e\n\u003ctd\u003e1x 6SN7 or 2x 6J5 (driver); 2x 6V6 or 2x 6F6 (output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tube\u003c\/td\u003e\n\u003ctd\u003e1x 5U4G (directly heated diode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eDHD 2x choke-filtered quasi dual-mono B+; discrete transistor shunt regulated LV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTopology\u003c\/td\u003e\n\u003ctd\u003eNOS, anode choke-loaded or OPT-decoupled, zero NFB, triode valve output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital input\u003c\/td\u003e\n\u003ctd\u003eS\/PDIF coaxial up to 24-bit\/96kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003eLess than 100 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput noise (unweighted)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.5 mVrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption\u003c\/td\u003e\n\u003ctd\u003e80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e250 x 450 x 410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SW1X","offers":[{"title":"Balanced","offer_id":43015183466653,"sku":"","price":25275.0,"currency_code":"USD","in_stock":true},{"title":"Special","offer_id":43018346365085,"sku":"","price":33375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/C78I1327-scaled.jpg?v=1665319012"},{"product_id":"enleum-hpa-23rm","title":"Enleum HPA-23RMH","description":"\u003cp\u003eThe Enleum HPA-23RMH is a reference headphone amplifier designed for both desktop and portable use, a Red Dot 2022 award winner that packs dual voltage and current output stages, an advanced battery circuit, and the Ensence input module from the Amp-23R into a chassis four times smaller than its predecessor, the Bakoon HPA-21.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop and portable reference headphone amplifier, solid-state. Ensence input module, fully discrete, zero negative feedback, ultra-fast frequency response, inherited directly from the Amp-23R. Dual output stage: MOSFET voltage output with simplified JET2 Bias circuit, and bipolar transistor current output descended from the Bakoon HPA-21. Solid-state relay attenuator with ultra-precision resistor network. Two operating modes: R mode (full output, desktop or external battery via USB-C) and M mode (efficient, internal battery only). RCA and 3.5mm mini jack inputs. 6.35mm current output and 3.5mm voltage output headphone jacks.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe dual output configuration is the HPA-23RMH's defining characteristic, the current output provides a fundamentally different connection to the headphone driver compared to conventional voltage amplifiers, delivering a sense of directness and dynamic control that is immediately apparent on high-quality transducers. The voltage output offers a more conventional presentation, equally accomplished. The Ensence module ensures that both outputs maintain transparency at any gain or volume level.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePrecision-machined aluminum chassis at 116 x 164.5 x 22mm, genuinely portable despite the reference performance. Machined waveform heatsinks integrated into the sides of the chassis serve as both the thermal management system and the primary design statement. Red Dot Design Award 2022 winner. Internal batteries provide up to 5 hours in M mode; R mode operates continuously from external power.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eSerious headphone listeners who want Enleum's reference amplifier performance in a form factor that works on a desktop or travels, and those curious about current-output amplification as an alternative to conventional voltage-mode headphone amplifiers.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnleum HPA-23RMH headphone amplifier\u003c\/li\u003e\n\u003cli\u003eUSB-C power cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop and portable reference headphone amplifier, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput stages\u003c\/td\u003e\n\u003ctd\u003eMOSFET voltage output + bipolar transistor current output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\u003ctd\u003e1W (current output) \/ 500mW (voltage output) at 30 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eRCA, 3.5mm mini jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e6.35mm (current), 3.5mm (voltage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating modes\u003c\/td\u003e\n\u003ctd\u003eR (full power, external power\/battery via USB-C), M (efficient, internal battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery life\u003c\/td\u003e\n\u003ctd\u003eUp to 5 hours (M mode, internal battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e116 x 164.5 x 22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign award\u003c\/td\u003e\n\u003ctd\u003eRed Dot Design Award 2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Enleum","offers":[{"title":"Default Title","offer_id":50499547332887,"sku":null,"price":3500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/HPA-23RM_2-scaled.jpg?v=1667968230"},{"product_id":"gustard-r26","title":"Gustard R26","description":"\u003cp\u003eThe Gustard R26 is a discrete R2R DAC and network streamer, combining a fully discrete resistor ladder conversion stage with Roon-ready networking, DSD512 native support, and ACSS current output in a versatile package that offers an alternative to chip-based delta-sigma conversion for those who prefer the character of R2R architecture.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDiscrete R2R DAC and network streamer. Fully discrete R2R resistor ladder conversion, no chip-based DAC. Network streaming: Roon Ready, AirPlay, UPnP, NAA, Spotify Connect. LAN input. USB, coaxial, AES\/EBU, optical, and I2S digital inputs. PCM up to 32-bit\/768kHz; native DSD64–DSD512. ACSS (Active Current Signal Source) current output alongside balanced XLR and unbalanced RCA. OS support for Windows 7–11, macOS, and Linux via USB. Remote control included.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eNatural, warm, and tonally rich, R2R ladder conversion has a musical character that many listeners find more engaging and analogue-like than delta-sigma designs. The R26 delivers the R2R sound with the convenience of integrated network streaming, making it a compelling one-box source for those who want the character of discrete resistor ladder conversion without sacrificing modern connectivity.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eFull-width aluminum chassis in black or silver. Remote control included. Broad OS compatibility for USB audio.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want the natural, musical character of discrete R2R conversion with integrated Roon-ready streaming, an ideal alternative to delta-sigma DACs for listeners who prioritize tonal character over measured performance benchmarks.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGustard R26 DAC\/streamer\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDiscrete R2R DAC and network streamer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConversion\u003c\/td\u003e\n\u003ctd\u003eFully discrete R2R resistor ladder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003eUp to 32-bit \/ 768kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eNative DSD64–DSD512; DoP DSD64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eUSB, coaxial, AES\/EBU, optical, I2S, LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA, ACSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork protocols\u003c\/td\u003e\n\u003ctd\u003eRoon Ready, AirPlay, UPnP, NAA, Spotify Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOS support (USB)\u003c\/td\u003e\n\u003ctd\u003eWindows 7–11 (32\/64-bit), macOS, Linux\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Gustard","offers":[{"title":"Silver","offer_id":44348605726999,"sku":"","price":1649.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":44348605759767,"sku":"","price":1649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/4532067dc56a798f0effa50e9250d587_826b6f2b-01da-42df-81cf-af4db05a7f9c_2048x2048-Copy.webp?v=1674312836"},{"product_id":"ta-a200-stereo-amplifier","title":"T+A A200 Stereo Amplifier","description":"\u003cp\u003eT+A's reference stereo power amplifier, the A 200 delivers high-power audiophile amplification built around a fully discrete output stage developed with T+A's decades of loudspeaker amplifier expertise. Made in Germany.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eStereo power amplifier, solid-state. Fully discrete output stage with high current capability. Balanced XLR and single-ended RCA inputs. Available in Black or Silver.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003eHigh output power with audiophile-grade sound character, suitable for driving demanding loudspeaker loads as well as the T+A Solitaire P headphone system. The A 200 can also serve as a headphone amplifier when paired with the T+A Solitaire P via the appropriate adapter.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eT+A system builders who want a reference stereo amplifier that integrates with the broader T+A 200 series component family.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eT+A A 200 stereo amplifier\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eStereo power amplifier, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, single-ended RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable finishes\u003c\/td\u003e\n\u003ctd\u003eBlack, Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"T+A","offers":[{"title":"Black","offer_id":44479194136855,"sku":"","price":6495.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":44479194169623,"sku":"","price":6495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/a_200_slider_a_200_frontal-scaled.jpg?v=1676850513"},{"product_id":"stax-srm-d10-pre-owned","title":"STAX SRM-D10 (Pre-Owned)","description":"\u003cp\u003ePre-owned STAX SRM-D10 in excellent condition. The SRM-D10 is the world's first compact electrostatic amp\/DAC, making all STAX Pro-bias earspeakers compatible with modern digital sources including USB and mobile devices.\u003c\/p\u003e\n\n\u003ch3\u003eCondition\u003c\/h3\u003e\n\u003cp\u003e9\/10 — looks excellent with minimal signs of use.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTAX SRM-D10 DAC\/Amp (pre-owned)\u003c\/li\u003e\n\u003cli\u003eOriginal accessories included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eElectrostatic DAC\/Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eAll STAX Pro-bias earspeakers (5-pin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eUSB, 3.5mm analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003ePre-owned, 9\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"STAX","offers":[{"title":"Default Title","offer_id":44498389565719,"sku":"","price":825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/photo_2023-02-22_23-44-42.jpg?v=1677133745"},{"product_id":"t-a-dac200","title":"T+A DAC200","description":"\u003cp\u003eT+A's reference digital-to-analog converter and preamplifier, the DAC 200 is the latest and most sophisticated converter in T+A's extended family of High-End DAC and preamplifier designs, built around a fully proprietary DAC architecture developed entirely in-house. Made in Germany.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference DAC and analog preamplifier. Proprietary T+A converter architecture supporting PCM up to 32-bit\/768kHz and DSD up to DSD1024. Balanced and single-ended analog outputs. Comprehensive digital input connectivity. Available in Black or Silver.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003eMultiple digital inputs including USB, coaxial, optical, and AES\/EBU. Volume-controlled balanced XLR outputs for direct connection to power amplifiers. T+A's proprietary digital filter implementation provides multiple sound character options. Designed as the definitive source for the 200 series amplifier family.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eT+A system builders who want a reference digital source and preamplifier in a single component, paired with the HA 200, A 200, or M 200 amplifiers.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eT+A DAC 200 converter and preamplifier\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference DAC and analog preamplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC resolution\u003c\/td\u003e\n\u003ctd\u003ePCM up to 32-bit \/ 768kHz, DSD up to DSD1024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eUSB, coaxial, optical, AES\/EBU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, single-ended RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable finishes\u003c\/td\u003e\n\u003ctd\u003eBlack ($8,895), Silver ($8,495)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"T+A","offers":[{"title":"Black","offer_id":44680950087959,"sku":"","price":8895.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":44680950120727,"sku":"","price":8495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/dac_200_slider_dac_200_frontal-scaled-1000x500.jpg?v=1679094913"},{"product_id":"mass-kobo-model-433","title":"MASS-Kobo Model 433","description":"\u003cp\u003eThe MASS-Kobo Model 433 is M. Masuda's mid-tier fully balanced desktop amplifier, inheriting the sonic character of the legendary Model 406 and the high-end 394II, and combining it with the output circuit of the Model 402 used by NHK Japan as a broadcast reference amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eFully balanced desktop headphone amplifier, solid-state. Balanced XLR input with +4dBm\/-10dBm reference level selection and unbalanced RCA input. Balanced XLR4 and single-ended 6.35mm TRS outputs. Worldwide power supply (AC100-240V). Compact and lightweight by MASS-Kobo standards. Made to order in Japan.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eRich, low-distortion, and immensely musical. The 433 is the amplifier that customer after customer returns to call a revelation, instruments appear with a tangibility and presence that transforms familiar recordings, and the sense of stability and authority across the full frequency range is immediately apparent. A headphone amplifier that makes every headphone in the chain better.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eBuilt individually by M. Masuda to his exacting specifications. Each unit is made to order with a production time of approximately 1 to 4 months. Worldwide power supply (AC100-240V). Compact chassis at 232 x 210 x 48mm.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want the MASS-Kobo sound at a more accessible entry point than the 465, and those pairing with demanding headphones including the Final D8000, HiFiMan Edition X, and similar high-performance planars and dynamics.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMASS-Kobo Model 433 headphone amplifier\u003c\/li\u003e\n\u003cli\u003eIEC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is a made-to-order product. Production time is approximately 1 to 4 months from order. No cancellations are accepted after an order is placed. Custom duties are the responsibility of the customer.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFully balanced desktop headphone amplifier, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR3, unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR4, unbalanced 6.35mm TRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e3.7k ohms (XLR), 12k ohms (RCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference input level\u003c\/td\u003e\n\u003ctd\u003e+4dBm \/ -10dBm selectable (XLR), -10dBm (RCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output without distortion\u003c\/td\u003e\n\u003ctd\u003e1.2W + 1.2W balanced, 500mW + 500mW unbalanced (32 ohms, 1kHz, THD+N 0.05%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e10 Hz - 100 kHz (-0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eAC 100-240V, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e232 x 210 x 48 mm (excluding protrusions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.4 kg (without power cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"MASS-Kobo","offers":[{"title":"Default Title","offer_id":44778561634583,"sku":"","price":2750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/m433-tront800x600.jpg?v=1680110452"},{"product_id":"mass-kobo-model-475","title":"MASS-Kobo Model 475","description":"\u003cp\u003eThe MASS-Kobo Model 475 brings M. Masuda's fully balanced amplifier engineering to a portable battery-powered format, a compact, high-performance headphone amplifier that runs on four AA batteries or USB-C power delivery, with the same attention to signal quality that defines the desktop lineup.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eFully balanced portable headphone amplifier, solid-state. Single 4.4mm Pentaconn input with a mode switch to accept unbalanced sources via a conversion cable. Balanced 4.4mm TRRS and unbalanced 3.5mm TRS outputs. Internal gain switch (Hi\/Lo) for accommodating both sensitive balanced armature IEMs and inefficient full-size planar headphones. Battery powered (4x AA alkaline or rechargeable) or USB-C power delivery. Made to order in Japan.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eClean, composed, and remarkably low-noise for a battery-powered design. The 475 delivers the MASS-Kobo character in a portable package, a transparent and controlled presentation that lets the headphone and source speak without interference, with a noise floor low enough to pair comfortably with sensitive IEMs on the Lo gain setting.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eCompact and solid construction at 97 x 132 x 40mm. Battery operation provides approximately 4 hours of use from alkaline AA cells (varies by battery condition and type). USB-C port for external power delivery only, not for charging. The external power supply input has been updated from Micro-USB to USB-C.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want MASS-Kobo's amplifier quality in a portable format, for travel, desktop use with a DAP, or anyone who wants an analog gain stage between a balanced source and their headphones or IEMs.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMASS-Kobo Model 475 portable headphone amplifier\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is a made-to-order product. Production time is approximately 1 to 4 months from order. No cancellations are accepted after an order is placed. Custom duties are the responsibility of the customer. Balanced output does not support unbalanced headphones directly, a conversion cable is required.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFully balanced portable headphone amplifier, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e4.4mm TRRS x1 (balanced or unbalanced via conversion cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e4.4mm TRRS (balanced), 3.5mm TRS (unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain switch\u003c\/td\u003e\n\u003ctd\u003eHi \/ Lo (internal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output without distortion\u003c\/td\u003e\n\u003ctd\u003e165mW balanced, 45mW unbalanced (32 ohms, 1kHz, THD+N 0.5%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20 Hz - 20 kHz (-1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise floor\u003c\/td\u003e\n\u003ctd\u003eLess than 40μV (min volume, 32 ohms loaded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e4x AA battery (approx. 4 hours), or USB-C power delivery (5V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e97 x 132 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e440g (with batteries) \/ 382g (without batteries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"MASS-Kobo","offers":[{"title":"Default Title","offer_id":44779207229719,"sku":"","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/m475.jpg?v=1680122506"},{"product_id":"ferrum-wandla","title":"Ferrum Wandla 2.0 DAC\/Pre","description":"\u003cp\u003eThe Ferrum Wandla 2.0 is a reference DAC and preamplifier built around the ESS Sabre ES9038PRO, fine-tuned by Ferrum's in-house engineering team for a transparent, fatigue-free presentation, with dynamic filter selection, MQA decoding, and a fully balanced signal path. Made in Poland.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference DAC and preamplifier, solid-state. ESS Sabre ES9038PRO DAC chip with Ferrum's proprietary current-to-voltage conversion optimization. Seven built-in ESS digital filters plus additional HQ Player filters, selectable via front panel or app. MQA decoder and renderer on all digital inputs. Digital inputs: AES\/EBU, optical S\/PDIF, coaxial S\/PDIF, USB-C (up to 768kHz\/32bit, DSD256), ARC with CEC, I2S. Analog input: RCA. Proprietary FPL DC power connector for connection to the \u003ca href=\"\/products\/ferrum-hypsos\"\u003eFerrum HYPSOS\u003c\/a\u003e for maximum performance. Made in Poland.\u003c\/p\u003e\n\n\u003ch3\u003eSystem Integration\u003c\/h3\u003e\n\u003cp\u003eThe Wandla 2.0 is the natural source component for the \u003ca href=\"\/products\/ferrum-oor\"\u003eFerrum OOR\u003c\/a\u003e headphone amplifier and \u003ca href=\"\/products\/ferrum-erco-2\"\u003eFerrum ERCO Gen 2\u003c\/a\u003e in a complete Ferrum system. Connecting both the Wandla and OOR to the \u003ca href=\"\/products\/ferrum-hypsos\"\u003eFerrum HYPSOS Dual Output\u003c\/a\u003e via FPL cables provides a dedicated linear power supply to both components simultaneously. The Ferrum BROEN network streaming transport pairs directly with the Wandla for a complete streaming source solution.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eTransparent, musically balanced, and free of digital harshness. 127dB dynamic range and 0.00009% THD in an implementation tuned by Ferrum's own engineers rather than deployed off-the-shelf. Sounds spacious and natural rather than clinical.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eMatched form factor to the \u003ca href=\"\/products\/ferrum-oor\"\u003eFerrum OOR\u003c\/a\u003e and \u003ca href=\"\/products\/ferrum-hypsos\"\u003eHYPSOS\u003c\/a\u003e at 217 x 206 x 50mm and 1.8kg. Comes with a DC power adapter; upgrades via the HYPSOS and FPL cable. Made in Poland.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFerrum Wandla 2.0 DAC\/preamplifier\u003c\/li\u003e\n\u003cli\u003eDC power adapter\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference DAC and preamplifier, solid-state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC chip\u003c\/td\u003e\n\u003ctd\u003eESS Sabre ES9038PRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 768kHz\/32bit, DSD256\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eAES\/EBU, optical S\/PDIF, coaxial S\/PDIF, USB-C, ARC (CEC), I2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003eRCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR, unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput level\u003c\/td\u003e\n\u003ctd\u003e9.3V RMS balanced, 4.65V RMS unbalanced at 0dBFS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC THD\u003c\/td\u003e\n\u003ctd\u003e-121 dB (0.00009%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e127 dB (A-weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMQA\u003c\/td\u003e\n\u003ctd\u003eDecoder and renderer (all digital inputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eDC 22-30V (adapter included); FPL port for HYPSOS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e217 x 206 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Ferrum","offers":[{"title":"No \/ No","offer_id":50723724820759,"sku":null,"price":3195.0,"currency_code":"USD","in_stock":true},{"title":"Yes (+$1395) \/ No","offer_id":50723724853527,"sku":null,"price":4590.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes (+$500)","offer_id":51541024702743,"sku":null,"price":3695.0,"currency_code":"USD","in_stock":true},{"title":"Yes (+$1395) \/ Yes (+$500)","offer_id":51541024735511,"sku":null,"price":5090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/products\/IMG_1039_1.jpg?v=1680634259"},{"product_id":"sw1x-pre-ii","title":"SW1X PRE II","description":"\u003cp\u003eThe SW1X PRE II is a pure Class A, zero negative feedback line preamplifier with an Output Transformerless (OTL) power valve output stage, a natural extension of the SW1X DAC and LPU phono stage ecosystem, using 6V6GT power tubes to reduce output impedance and add authority, fullness, and dynamic expressiveness to any source connected before it.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eLine preamplifier with optional phono stage, single-ended Class A vacuum tube. OTL (Output Transformerless) topology using 6V6GT power valves in triode connection at the output, sharing its power valve output design with the flagship SW1X PRE IV. Tube complement: 2x 6V6GT output, 1x 6SN7 driver, 1x 5Y3 directly heated rectifier. 5Y3 valve-rectified CLC choke-filtered B+ power supply. Hybrid point-to-point hardwiring for production consistency. SW1X Stepped Attenuator volume control (24-way discrete resistor). Internally wired with SW1X Magnum, Genesis, and Opus conductors. Available with optional integrated LPX phono stage (designated PRE II LPX), an EF86-based MM phono preamplifier with active series-resistor-less RIAA equalization and its own 5Y3 choke-filtered supply. Output impedance: 10 ohms.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe PRE II brings fullness, authority, and enhanced dynamic expressiveness to any source driving power amplifiers, the 6V6GT output stage's low output impedance unlocks the full potential of connected sources, including SW1X DACs and phono stages with their inherently higher output impedance tube output stages. The OTL topology keeps the signal path clear of output transformers while still providing the tonal character and control that power valves deliver.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003e150 x 330 x 400mm at 10kg (12kg with LPX phono option). Specifications subject to change as SW1X's ongoing research and development continues.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eSW1X DAC and LPU Phono owners who want a valve preamplifier to complete their system, and those who want the authority and dynamic presence of a power valve output stage in a line preamplifier without the complexity of output transformers.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eLine preamplifier, OTL Class A, single-ended vacuum tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tubes\u003c\/td\u003e\n\u003ctd\u003e2x 6V6GT (triode connected)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver tube\u003c\/td\u003e\n\u003ctd\u003e1x 6SN7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tube\u003c\/td\u003e\n\u003ctd\u003e1x 5Y3 (directly heated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e5Y3 valve-rectified CLC choke-filtered B+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume control\u003c\/td\u003e\n\u003ctd\u003eSW1X 24-way discrete stepped attenuator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003e10 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput noise (unweighted)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.5 mVrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption\u003c\/td\u003e\n\u003ctd\u003e110W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e150 x 330 x 400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10 kg (12 kg with LPX phono)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SW1X","offers":[{"title":"PRE II","offer_id":45026915516695,"sku":"","price":4850.0,"currency_code":"USD","in_stock":true},{"title":"PRE II LPX - Line\/Phono Pre-Amplifier","offer_id":45026915549463,"sku":"","price":6500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/C78I1962-scaled_d1b04e0a-ae79-4dcc-ae82-92a941e3cece.webp?v=1682994788"},{"product_id":"sw1x-pre-iii","title":"SW1X PRE III","description":"\u003cp\u003eThe SW1X PRE III is a pure Class A, zero negative feedback line preamplifier with a signal output transformer-coupled EL84 valve output stage, the more refined and transparent sibling to the PRE II, delivering a near-zero 4 ohm output impedance and the tonal purity, scale, and dynamic authority that only a transformer-coupled power valve output stage can provide. Available in four transformer quality levels from Standard to Signature.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eLine preamplifier with optional phono stage, single-ended Class A vacuum tube with signal output transformer (OPT). OPT-decoupled output stage using EL84 power pentodes in triode connection, driven by 6N6P or 5687 double triode. SW1X custom-wound signal output transformers available in four grades: M6 EI core (Standard), all-copper Super HiB DC core (Special), copper\/silver Super HiB DC core (Classic), all-silver Ultra HiB DC core (Signature). 5U4GYB or 5Y3 directly heated valve-rectified CLC2LC choke-filtered B+ power supply. Hybrid point-to-point hardwiring. Dual mono 24-way SW1X stepped attenuators made from the finest materials and selected resistors. Internally wired with SW1X Magnum, Genesis, and Opus conductors. Available with optional PRE III LPX phono stage, EF86-based MM phono with its own 5Y3 choke-filtered supply. Output impedance: 4 ohms.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eTransparent, tonally pure, and possessed of the dynamic authority that the combination of power valves and output transformers uniquely provides. The PRE III's output transformer removes the output stage from direct contact with the downstream load, allowing a purer and more controlled coupling to the power amplifier. The 4-ohm output impedance means the PRE III can drive virtually any power amplifier load without compromise. When configured with the Signature silver-wound OPTs, the PRE III represents the finest analog preamplifier in the SW1X lineup below the PRE IV.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003e150 x 440 x 400mm at 17kg (22kg with LPX phono). Four OPT quality levels available as variants. Specifications subject to SW1X's ongoing research and development.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eSW1X DAC and LPU Phono owners who want the full SW1X system experience, and those who want the dynamic authority and tonal purity of a transformer-coupled valve preamplifier output stage with near-zero output impedance.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eLine preamplifier, OPT-coupled Class A, single-ended vacuum tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput tubes\u003c\/td\u003e\n\u003ctd\u003e2x EL84 (triode connected)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver tube\u003c\/td\u003e\n\u003ctd\u003e1x 6N6P or 5687\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectifier tube\u003c\/td\u003e\n\u003ctd\u003e1x 5U4GYB or 5Y3 (directly heated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal output transformers\u003c\/td\u003e\n\u003ctd\u003eStandard: M6 EI core \/ Special: Copper Super HiB DC core \/ Classic: Cu+Ag Super HiB \/ Signature: Ag\/Ag Ultra HiB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eDHT valve-rectified CLC2LC choke-filtered B+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume control\u003c\/td\u003e\n\u003ctd\u003eDual mono SW1X 24-way discrete stepped attenuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput noise (unweighted)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.5 mVrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption\u003c\/td\u003e\n\u003ctd\u003e180W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e150 x 440 x 400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e17 kg (22 kg with LPX phono)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"SW1X","offers":[{"title":"PRE III \/ Silver","offer_id":45027114778903,"sku":"","price":11075.0,"currency_code":"USD","in_stock":true},{"title":"PRE III \/ Black","offer_id":45027114811671,"sku":"","price":11075.0,"currency_code":"USD","in_stock":true},{"title":"PRE III LPX \/ Silver","offer_id":45027114844439,"sku":"","price":13875.0,"currency_code":"USD","in_stock":true},{"title":"PRE III LPX \/ Black","offer_id":45027114877207,"sku":"","price":13875.0,"currency_code":"USD","in_stock":true},{"title":"PRE III Special \/ Silver","offer_id":45027114909975,"sku":"","price":14550.0,"currency_code":"USD","in_stock":true},{"title":"PRE III Special \/ Black","offer_id":45027114942743,"sku":"","price":14550.0,"currency_code":"USD","in_stock":true},{"title":"PRE III LPX Special \/ Silver","offer_id":45027114975511,"sku":"","price":17395.0,"currency_code":"USD","in_stock":true},{"title":"PRE III LPX Special \/ Black","offer_id":45027115008279,"sku":"","price":17395.0,"currency_code":"USD","in_stock":true},{"title":"PRE III Signature \/ Silver","offer_id":45027115041047,"sku":"","price":30500.0,"currency_code":"USD","in_stock":true},{"title":"PRE III Signature \/ Black","offer_id":45027115073815,"sku":"","price":30500.0,"currency_code":"USD","in_stock":true},{"title":"PRE III LPX Signature \/ Silver","offer_id":45027115106583,"sku":"","price":35350.0,"currency_code":"USD","in_stock":true},{"title":"PRE III LPX Signature \/ Black","offer_id":45027115139351,"sku":"","price":35350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/C78I1450-scaled_3aa30b5d-270d-45dd-b73b-f8da80d1ffe1.webp?v=1682998235"},{"product_id":"stax-srm-700t-sr-l700mk2-bundle","title":"Bundle Set SR-L700MKII + SRM-700S \/ SRM-700T","description":"\u003cp\u003eA complete STAX bundle pairing the SR-L700 MK2 Lambda earspeaker with your choice of the SRM-700S solid-state or SRM-700T hybrid energizer, providing a well-matched and high-performing electrostatic system at a bundle price.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eComplete electrostatic earspeaker system. SR-L700 MK2 MLER-based earspeaker paired with either the SRM-700S (solid-state) or SRM-700T (hybrid tube\/solid-state) energizer, both at the same price.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want a complete, high-performance STAX system with the SR-L700 MK2 without the need to source components separately.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTAX SR-L700 MK2 earspeaker\u003c\/li\u003e\n\u003cli\u003eSRM-700S or SRM-700T driver unit (per selected variant)\u003c\/li\u003e\n\u003cli\u003ePro-bias cable\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarspeaker\u003c\/td\u003e\n\u003ctd\u003eSR-L700 MK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver unit options\u003c\/td\u003e\n\u003ctd\u003eSRM-700S (solid-state) or SRM-700T (hybrid)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"STAX","offers":[{"title":"SR-L700 MKII + SRM 700S","offer_id":45508121264407,"sku":"","price":4599.0,"currency_code":"USD","in_stock":true},{"title":"SR-L700 MKII + SRM 700T","offer_id":45508121297175,"sku":"","price":4599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/srm700s_L700mk2_1024x1024_2x_9cea9ad5-4263-4676-9c9d-bcd3fdf2beb8.webp?v=1687815273"},{"product_id":"meitner-ma3i","title":"Meitner MA3i","description":"\u003cp\u003eThe Meitner MA3i is the next evolution of the multi-award-winning MA3, a compact integrated DAC and network streamer built on the heritage of EMM Labs' reference converters, combining the next-generation MDAC2 proprietary 16xDSD discrete DAC with updated MDAT2 DSP signal processing, the latest VControl volume system from the EMM Labs DV2i, and an advanced network streaming platform with Roon Ready certification. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eIntegrated DAC and network music streamer. MDAC2, Meitner's next-generation proprietary fully discrete single-bit 16xDSD DAC architecture, the same conversion technology used in the EMM Labs DV2i and DA2i flagships. MDAT2 DSP, Meitner's updated digital audio translator for real-time transient detection and up-conversion of all incoming audio for maximum clarity and precision. VControl volume system, the latest generation from the DV2i, providing unmatched transparency at any volume level with no resolution loss across the entire control range. MFAST frequency acquisition and MCLK3 asynchronous clock, proprietary systems reducing jitter to industry-leading levels. USB audio and network interfaces with galvanic isolation and custom power systems for superior noise rejection. Digital inputs: AES\/EBU, S\/PDIF coaxial, TOSLINK, USB Audio, Network (RJ45). PCM up to 24-bit\/192kHz and DSD over all inputs. DXD (352\/384kHz) and 2xDSD via USB and Network. MQA full decoding via USB and Network. Streaming: Roon Ready\/Endpoint, Tidal\/Tidal Connect, Qobuz, Spotify Connect, Deezer, vTuner, UPnP\/DLNA. Stereo analog outputs: balanced XLR (4.36V), unbalanced RCA (2.19V). IR remote. RS232 interface. Universal 90-260V power supply. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe MA3i brings the MDAC2 and MDAT2 from EMM Labs' flagship reference components to a compact, affordable integrated source. The proprietary single-bit 16xDSD conversion architecture is the foundation of everything EMM Labs and Meitner do, it is not a chip-based delta-sigma implementation but a fully discrete design built to Ed Meitner's own specifications. The result is a tonal naturalness, dynamic coherence, and low-level resolution that chip-based DACs at any price cannot replicate.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003e435 x 400 x 92mm at 7.43kg. Fine bead-blasted front panel in Silver or Black. Remote control included. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want the EMM Labs\/Meitner MDAC2 proprietary DAC architecture in a compact integrated streaming DAC, the ideal entry into the Meitner sound without separate transport and preamplifier components.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeitner MA3i integrated DAC\/streamer\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eIntegrated DAC and network music streamer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC architecture\u003c\/td\u003e\n\u003ctd\u003eMDAC2, proprietary fully discrete single-bit 16xDSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP\u003c\/td\u003e\n\u003ctd\u003eMDAT2 with MFAST and MCLK3 clocking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003eUp to 24-bit \/ 192kHz (all inputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDXD \/ 2xDSD\u003c\/td\u003e\n\u003ctd\u003eYes (USB Audio and Network)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMQA\u003c\/td\u003e\n\u003ctd\u003eFull decoder (USB and Network)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eAES\/EBU, S\/PDIF coaxial, TOSLINK, USB Audio, Network (RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStreaming\u003c\/td\u003e\n\u003ctd\u003eRoon Ready\/Endpoint, Tidal Connect, Qobuz, Spotify Connect, Deezer, vTuner, UPnP\/DLNA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR (4.36V \/ +15.0dBu), Unbalanced RCA (2.19V \/ +9.0dBu)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance (XLR)\u003c\/td\u003e\n\u003ctd\u003e300 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance (RCA)\u003c\/td\u003e\n\u003ctd\u003e150 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eUniversal 90-260V, 50\/60Hz; max 50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e435 x 400 x 92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.43 kg (16.39 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned and manufactured\u003c\/td\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Meitner","offers":[{"title":"Silver","offer_id":45672742158615,"sku":"","price":11500.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45672742191383,"sku":"","price":11500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/MA-3_Front_1.jpg?v=1688929166"},{"product_id":"meitner-pre-stereo-preamplifier","title":"Meitner PRE Stereo Preamplifier","description":"\u003cp\u003eThe Meitner PRE is a compact reference line preamplifier built on the heritage of the EMM Labs PRE, applying Ed Meitner's philosophy that the preamplifier is the heart of every music system to a more accessible and compact chassis, with contactless switching, discrete dual-balanced signal paths, Class A output stage, and proprietary software-driven volume control. The natural partner for the Meitner MA3i DAC\/streamer. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference analog line preamplifier, fully discrete Class A, solid-state. Contactless switching, no mechanical contacts in the signal path. Discrete dual-balanced signal paths. Proprietary software-driven analog volume control with 74dB range and no signal bandwidth degradation across the entire control range, identical approach to the EMM Labs PRE. Pure Class A output stage for driving cables and loads without degradation. DC protection circuit for downstream components. User-friendly control system with volume presets per input (3 per input) and balance control. Three stereo analog inputs: one balanced XLR, two single-ended RCA. Two stereo analog outputs: one balanced XLR, one single-ended RCA, both can be used simultaneously for subwoofer integration or secondary amplifier. High-efficiency low-noise power supply. RS232 interface for system upgrades and remote commands. Universal 90-260V supply. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe Meitner PRE applies the EMM Labs approach to preamplifier design, maximum transparency through contactless switching and discrete signal paths, at a more accessible price. Users consistently describe a surprising level of resolution and tonal accuracy for the price point, a reflection of the genuine engineering lineage connecting the Meitner PRE to Ed Meitner's reference preamplifier work.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003e435 x 400 x 92mm at 7.43kg, matching footprint to the Meitner MA3i for a clean two-component system. Fine bead-blasted front panel in Silver or Black. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eMeitner MA3i owners who want a matched preamplifier from the same engineering lineage, and those who want the EMM Labs preamplifier approach in a compact, accessible chassis.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeitner PRE preamplifier\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference analog line preamplifier, fully discrete Class A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003eBetter than 116 dB at 4V RMS output (20kHz bandwidth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003eLess than 0.004%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e0 Hz - 200 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain control range\u003c\/td\u003e\n\u003ctd\u003e74 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum input level\u003c\/td\u003e\n\u003ctd\u003e+18 dBu (6.2V RMS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem gain\u003c\/td\u003e\n\u003ctd\u003e+6 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance (XLR)\u003c\/td\u003e\n\u003ctd\u003e20k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance (RCA)\u003c\/td\u003e\n\u003ctd\u003e10k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance (XLR)\u003c\/td\u003e\n\u003ctd\u003e150 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance (RCA)\u003c\/td\u003e\n\u003ctd\u003e75 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e1x balanced XLR, 2x single-ended RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog outputs\u003c\/td\u003e\n\u003ctd\u003e1x balanced XLR, 1x single-ended RCA (simultaneous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eUniversal 90-260V, 50\/60Hz; max 50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e435 x 400 x 92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.43 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned and manufactured\u003c\/td\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Meitner","offers":[{"title":"Silver","offer_id":45672812544279,"sku":"","price":7500.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45672812577047,"sku":"","price":7500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/3m-nV6GA.jpg?v=1688930273"},{"product_id":"emm-labs-dv2","title":"EMM Labs DV2i","description":"\u003cp\u003eThe EMM Labs DV2i is an integrated digital-to-analog converter and preamplifier built on EMM Labs' proprietary 16xDSD (DSD1024) conversion technology, the same platform as the flagship DA2i, now with an analog preamplifier stage and variable output for direct power amplifier connection. The pinnacle of digital-to-analog conversion in a single component from one of the most respected names in digital audio.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference DAC and preamplifier. EMM Labs' proprietary 16xDSD (DSD1024) MDAT2 conversion technology, developed in-house by Ed Meitner for over three decades. Fully discrete analog output stage. Variable output for direct connection to a power amplifier. Fixed output for use with a separate preamplifier. Balanced XLR and unbalanced RCA outputs. Digital inputs: USB, AES\/EBU, SPDIF coaxial, SPDIF optical, and EMM OptiLink (proprietary fiber for EMMDAC2 connection). Supports PCM up to 32-bit\/DXD (352.8kHz\/384kHz) and DSD1024 natively. Remote control included.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eEMM Labs' DSD1024 conversion has a character of complete naturalness, recordings reproduced with a sense of space, timbral accuracy, and dynamic presence that removes the digital artifice that many converters impose on the listening experience. The DV2i adds preamplifier capability to this foundation, making it a compelling direct connection to a power amplifier without an additional component in the signal path.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eFull-width machined aluminum chassis reflecting EMM Labs' premium Canadian craftsmanship. Remote control included. Available in silver.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want EMM Labs' reference DSD1024 conversion with integrated preamplifier capability, the complete, minimalist digital source for a reference-level two-channel system.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEMM Labs DV2i DAC\/preamplifier\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference DAC and preamplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConversion\u003c\/td\u003e\n\u003ctd\u003eEMM Labs proprietary 16xDSD (DSD1024), MDAT2 technology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003eUp to 32-bit \/ 384kHz (DXD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eUp to DSD1024 natively\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eUSB, AES\/EBU, SPDIF coaxial, SPDIF optical, EMM OptiLink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR (variable and fixed), unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"EMM Labs","offers":[{"title":"Silver","offer_id":45673121677591,"sku":"","price":35000.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45673121710359,"sku":"","price":35000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/DV2i_R_L_2_W.jpg?v=1728944287"},{"product_id":"emm-labs-da2i","title":"EMM Labs DA2i","description":"\u003cp\u003eThe EMM Labs DA2i is the flagship standalone DAC, EMM Labs' most accomplished digital-to-analog converter, built around the company's proprietary 16xDSD (DSD1024) MDAT2 conversion technology and a fully discrete analog output stage. Thirty years of Ed Meitner's digital audio research distilled into a single component for listeners who want the finest digital-to-analog conversion available.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eFlagship reference DAC. EMM Labs' proprietary 16xDSD (DSD1024) MDAT2 conversion, the same technology licensed to Sony for the original Super Audio CD format. Fully discrete analog output stage. Fixed balanced XLR and unbalanced RCA outputs. Digital inputs: USB, AES\/EBU, SPDIF coaxial, SPDIF optical, and EMM OptiLink (proprietary optical connection for compatible EMM transport). PCM support up to 32-bit\/DXD (352.8kHz\/384kHz); DSD up to DSD1024 natively. Remote control included.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eNatural, three-dimensional, and completely free of digital harshness, the DA2i presents recordings with a tonal accuracy and spatial realism that reflects Ed Meitner's conviction that DSD at very high multiples is the ideal format for musical reproduction. The 16xDSD upsampling process minimizes the quantization noise artifacts that affect conventional PCM and even standard DSD playback, and the result is a DAC that sounds like music rather than a convincing reproduction of it.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003ePremium full-width machined aluminum chassis with EMM Labs' meticulous build quality. Remote control included. Available in silver or black.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles who want the finest standalone DAC available from one of the most historically significant names in digital audio, particularly those building a reference two-channel system who want a dedicated DAC without preamplifier integration.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEMM Labs DA2i DAC\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFlagship reference DAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConversion\u003c\/td\u003e\n\u003ctd\u003eEMM Labs proprietary 16xDSD (DSD1024), MDAT2 technology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCM support\u003c\/td\u003e\n\u003ctd\u003eUp to 32-bit \/ 384kHz (DXD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSD support\u003c\/td\u003e\n\u003ctd\u003eUp to DSD1024 natively\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eUSB, AES\/EBU, SPDIF coaxial, SPDIF optical, EMM OptiLink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR (fixed), unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"EMM Labs","offers":[{"title":"Silver","offer_id":45673124004119,"sku":"","price":35000.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45673124036887,"sku":"","price":35000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/DA2i_R_L_2_W.jpg?v=1728944224"},{"product_id":"emm-labs-pre","title":"EMM Labs PRE","description":"\u003cp\u003eThe EMM Labs PRE is Ed Meitner's latest and most significant statement in the reference preamplifier category, built on the heritage of the multi-award-winning EMM Labs PRE2 and advancing beyond it with fully discrete dual-balanced signal paths, contactless switching, and aerospace-grade composite laminate circuit boards that provide measurably superior performance to conventional PCB materials. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eReference analog line preamplifier, solid-state, fully discrete Class A. Fully discrete dual-balanced signal paths from input to output. Contactless switching solutions, no mechanical contacts in the signal path. Precision software-driven analog volume control with better than 74dB control range and no signal bandwidth degradation across the entire volume range. Custom aerospace-grade composite laminate circuit boards: microscopically smooth copper traces for reduced skin effect, superior vibration resistance, lower dielectric losses, and superior heat conduction for long-term stability. Six stereo analog inputs: three balanced XLR, three single-ended RCA. Three stereo analog outputs: two balanced XLR, one single-ended RCA, enabling bi-amplification and tri-amplification setups. Three user-programmable volume presets per input. Large front panel display with customizable brightness and contrast. RS232 for wired remote and multi-system control. Proprietary high-isolation resonant mode power supply. Made in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eStunning transparency, the combination of fully discrete dual-balanced signal paths, contactless switching, and precision volume control produces an absence of coloration and a freedom from mechanical noise that makes the PRE one of the most transparent preamplifiers available at any price. The aerospace-grade PCB boards contribute measurably to long-term stability and uniformity of performance.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003e438 x 400 x 161mm at 17.2kg. Machined aluminum infrared remote control included. Available in Silver or Black with premium custom plated options. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles building the complete EMM Labs or Meitner system who want a preamplifier designed to the same engineering standard as the DA2i and DV2i, and those who want a reference-transparent preamplifier with extensive input\/output flexibility for complex multi-amplifier systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEMM Labs PRE preamplifier\u003c\/li\u003e\n\u003cli\u003eMachined aluminum infrared remote control\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReference analog line preamplifier, fully discrete Class A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003eBetter than 100 dB at 4V RMS output (unweighted, 80kHz bandwidth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003eLess than 0.004%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e0 Hz - 200 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain control range\u003c\/td\u003e\n\u003ctd\u003eBetter than 74 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum input level\u003c\/td\u003e\n\u003ctd\u003e+18 dBu (6.2V RMS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance (XLR)\u003c\/td\u003e\n\u003ctd\u003e40k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance (RCA)\u003c\/td\u003e\n\u003ctd\u003e20k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance (XLR)\u003c\/td\u003e\n\u003ctd\u003e150 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance (RCA)\u003c\/td\u003e\n\u003ctd\u003e75 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem gain\u003c\/td\u003e\n\u003ctd\u003e+6 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e3x balanced XLR, 3x single-ended RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog outputs\u003c\/td\u003e\n\u003ctd\u003e2x balanced XLR, 1x single-ended RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003eMax. 40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e438 x 400 x 161 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e17.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned and manufactured\u003c\/td\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"EMM Labs","offers":[{"title":"Silver","offer_id":45673119482135,"sku":"","price":25000.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45673119514903,"sku":"","price":25000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/PRE_Front.jpg?v=1688932870"},{"product_id":"emm-labs-mtrx2-1kw-mono-amplifiers","title":"EMM Labs MTRX2 1KW Mono Amplifiers","description":"\u003cp\u003eThe EMM Labs MTRX2 is a 1kW Class A\/B monoblock power amplifier designed and manufactured in Canada, built using the proprietary Meitner circuit topologies and zero overall negative feedback developed in the reference MTRX flagship, now in a more accessible monoblock format. The MTRX2 delivers the measured performance of a reference solid-state amplifier and the musical character of a classic tube design, capable of driving any loudspeaker load, including those down to 1 ohm, without instability or distortion increase.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eClass A\/B monoblock power amplifier, fully discrete, zero overall negative feedback. Proprietary Meitner circuit topologies inherited directly from the reference MTRX monoblocks. Fully discrete signal path with ultra-low distortion, very high bandwidth, and the ability to deliver massive transient currents instantaneously. Custom ceramic PCB boards, the same material choice as the MTRX, providing superior heat conduction, dimensional stability, and lower dielectric losses. Proprietary speaker protection and self-protection systems. Short and fully balanced audio paths throughout. Conservatively rated at 1,000W into 4 ohms. Completely stable at complex and low-impedance loads down to 1 ohm. Balanced XLR and unbalanced RCA inputs. Furutech speaker binding posts. RS232 and USB communication ports. 250V\/30A IP44 industrial power inlet. Supplied with custom Kimber Kable 30A power cable and custom EMM Labs flight case. Silver and Black ultrafine CNC precision finish. Standard or premium 24K Gold\/Silver\/Custom plated insert options. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe MTRX2 is what Ed Meitner describes as a \"gentle giant\", 1kW of measured capability used with the restraint and resolution of a high-quality single-ended triode tube amplifier. Zero overall negative feedback allows the circuit's natural character to express itself without the phase shift and temporal smearing that heavily feedback-corrected designs introduce. The result is an amplifier that sounds like none of the numbers would suggest, sweet, musical, and detailed rather than forceful or electronic.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003e544 x 584 x 297mm at 82kg per monoblock. Sold as a pair. Custom Kimber Kable 30A power cable and EMM Labs flight case included. CNC precision finish in Silver and Black. Designed and manufactured in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eAudiophiles with demanding loudspeaker loads who want the reference MTRX topology at a more accessible price, and those building the complete EMM Labs or Meitner reference system who want matched amplification.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEMM Labs MTRX2 monoblock amplifiers (pair)\u003c\/li\u003e\n\u003cli\u003eCustom Kimber Kable 30A power cables (pair)\u003c\/li\u003e\n\u003cli\u003eCustom EMM Labs flight cases (pair)\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eClass A\/B monoblock power amplifier, fully discrete, zero overall negative feedback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\u003ctd\u003e1,000W into 4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003eDC - 500 kHz (full rated power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003eGreater than 120 dB (A-weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003eLess than 0.005% (20Hz - 20kHz, full rated power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIMD\u003c\/td\u003e\n\u003ctd\u003eLess than 0.005%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew rate\u003c\/td\u003e\n\u003ctd\u003eGreater than 100 V\/µs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping factor\u003c\/td\u003e\n\u003ctd\u003eGreater than 1,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e1x balanced XLR, 1x unbalanced RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e100k ohms (both)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker outputs\u003c\/td\u003e\n\u003ctd\u003eFurutech binding posts (2 sets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e544 x 584 x 297 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e82 kg each (180 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned and manufactured\u003c\/td\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"EMM Labs","offers":[{"title":"Black","offer_id":45673254912279,"sku":"","price":85000.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":45673254945047,"sku":"","price":85000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/MTRX2.jpg?v=1688933885"},{"product_id":"woo-audio-tube-mini","title":"Woo Audio TUBE mini","description":"\u003cp\u003eThe Woo Audio TUBE mini is an ultraportable vacuum tube headphone amplifier and DAC, the result of Woo's pursuit to bring their tube heritage to a pocket-sized format, combining an ESS SABRE high-resolution DAC with a proprietary Mighty-Drive architecture that pairs each vacuum tube channel with MOSFET amplification for the dynamic authority and warmth of tubes in a device smaller than an average smartphone. Designed and assembled in New York.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eUltraportable vacuum tube DAC and headphone amplifier. Mighty-Drive topology: each channel uses a dedicated vacuum tube for tube character and warmth, combined with MOSFET output stage for drive capability and power, a hybrid architecture unique to the TUBE mini. Spring-loaded mechanical tube suspension system isolates tubes from external vibration, preventing tube microphonics from entering the signal path. ESS SABRE audiophile DAC for high-resolution lossless playback and streaming service compatibility. USB-C input with USB-A adapter cable included. Internal power management system for plug-and-play setup from USB-C power. Balanced 4.4mm headphone output and single-ended 3.5mm headphone output. Designed and assembled in New York. Three-year limited warranty.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eWarm, full, and engaging, the tube-driven character of the TUBE mini gives music a dimensionality and tonal richness that solid-state portable devices do not produce. The Mighty-Drive MOSFET stage adds the authority to drive full-sized headphones with genuine control, while the ESS SABRE DAC provides the resolution and detail that the tube stage can then express. A genuinely unique portable listening experience.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003eCompact chassis smaller than an average smartphone, housing the tube complement in a spring-loaded suspension system. Supplied with a USB-C to USB adapter cable and a travel case. Available in black. Designed and assembled in New York by Woo Audio.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eMusic lovers who want the warmth and engagement of vacuum tube amplification in a genuinely portable form factor, a carry-everywhere companion for full-sized headphones that sounds like nothing else at its size.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWoo Audio TUBE mini headphone amplifier\/DAC\u003c\/li\u003e\n\u003cli\u003eUSB-C to USB adapter cable\u003c\/li\u003e\n\u003cli\u003eTravel case\u003c\/li\u003e\n\u003cli\u003eQuick start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eUltraportable vacuum tube DAC and headphone amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTopology\u003c\/td\u003e\n\u003ctd\u003eWoo Mighty-Drive (tube + MOSFET hybrid, per channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC\u003c\/td\u003e\n\u003ctd\u003eESS SABRE audiophile DAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone outputs\u003c\/td\u003e\n\u003ctd\u003e4.4mm balanced, 3.5mm single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eUSB-C bus-powered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned and assembled\u003c\/td\u003e\n\u003ctd\u003eNew York, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Woo Audio","offers":[{"title":"Silver","offer_id":46368894615831,"sku":"","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":46368895992087,"sku":"","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46368896024855,"sku":"","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":46368896057623,"sku":"","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/DSC03969.jpg?v=1692501625"},{"product_id":"woo-wa7e-fireflies","title":"Woo WA7e Fireflies","description":"\u003cp\u003eThe Woo Audio WA7e Fireflies is a dedicated electrostatic headphone amplifier and DAC sharing the same unmistakable glass-enclosed aesthetic as the WA7, bringing the same tube character and compact elegance to 580V Pro-Bias electrostatic headphones from STAX, Audeze, HiFiMan, Dan Clark Audio, and others, while also functioning as a tube preamplifier for speaker system integration. Designed and assembled in New York.\u003c\/p\u003e\n\n\u003ch3\u003eType and Technology\u003c\/h3\u003e\n\u003cp\u003eDesktop vacuum tube DAC and electrostatic headphone amplifier, with tube preamplifier function. Fully balanced internal amplifier architecture designed specifically for modern 580V Pro-Bias electrostatic headphones. Two 12AU7\/5963 driver tubes, self-biasing, user-replaceable for tonal customization. PTFE tube sockets. ESS SABRE audiophile DAC supporting up to 24-bit\/384kHz PCM and DSD256 (11.2MHz). XMOS xCORE-AUDIO asynchronous USB for PC, Mac, Android, and iOS compatibility. High-retention USB connector. Analog RCA input. Internal linear power supply for single-chassis simplicity. Preamplifier function with 4.4mm balanced and 3.5mm stereo pre-out for speaker integration. Anodized aluminum chassis in midnight black or platinum silver, with glass display cover. Frequency response: 15Hz to 40kHz (-3dB). SNR: 100dB. Designed and assembled in New York. Three-year limited warranty.\u003c\/p\u003e\n\n\u003ch3\u003eSound Character\u003c\/h3\u003e\n\u003cp\u003eThe WA7e brings Woo's characteristic tube warmth and harmonic richness to the precision and speed of electrostatic reproduction. The 12AU7 tubes add body, dimensionality, and tonal saturation to the crystalline detail and transient accuracy that electrostatic drivers produce, a combination that users consistently describe as musical and involving rather than clinically analytical.\u003c\/p\u003e\n\n\u003ch3\u003eBuild and Finish\u003c\/h3\u003e\n\u003cp\u003e5.25\" H x 4.8\" W x 6\" D, a compact footprint that houses a full electrostatic energizer. Anodized aluminum chassis in midnight black or platinum silver, with glass display cover and anti-slip silicone pads. 9 lbs. Internal linear power supply, 115V to 230V auto-switching. Designed and assembled in New York.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The WA7e requires 580V Pro-Bias electrostatic headphones, sold separately. Standard dynamic or planar magnetic headphones are not compatible.\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eElectrostatic headphone owners who want tube character and warmth in their listening system alongside a built-in ESS SABRE DAC, in a compact and visually distinctive chassis that doubles as a tube preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWoo Audio WA7e Fireflies electrostatic amplifier\/DAC\u003c\/li\u003e\n\u003cli\u003e12AU7\/5963 vacuum tubes (x2, pre-installed)\u003c\/li\u003e\n\u003cli\u003eGlass cover with anti-slip silicone pads (x4)\u003c\/li\u003e\n\u003cli\u003eUSB-C to USB-B cable\u003c\/li\u003e\n\u003cli\u003eAC power cord\u003c\/li\u003e\n\u003cli\u003eQuick start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDesktop vacuum tube DAC and electrostatic headphone amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTubes\u003c\/td\u003e\n\u003ctd\u003e2x 12AU7\/5963 driver (self-biasing, user-replaceable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone compatibility\u003c\/td\u003e\n\u003ctd\u003e580V Pro-Bias electrostatic only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC\u003c\/td\u003e\n\u003ctd\u003eESS SABRE (up to 24-bit\/384kHz PCM, DSD256)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB interface\u003c\/td\u003e\n\u003ctd\u003eXMOS xCORE-AUDIO asynchronous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog input\u003c\/td\u003e\n\u003ctd\u003eRCA x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreamp outputs\u003c\/td\u003e\n\u003ctd\u003e4.4mm balanced, 3.5mm stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e15 Hz - 40 kHz (-3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003e100 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInternal linear, 115V to 230V auto-switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e5.25\" x 4.8\" x 6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e9 lbs (4.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned and assembled\u003c\/td\u003e\n\u003ctd\u003eNew York, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Woo Audio","offers":[{"title":"Platinum Silver \/ WA7e","offer_id":46368924401943,"sku":"","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Platinum Silver \/ WA7e with STAX L500 MK2","offer_id":46368924434711,"sku":"","price":2169.0,"currency_code":"USD","in_stock":true},{"title":"Platinum Silver \/ WA7e with STAX L700 MK2","offer_id":46368924467479,"sku":"","price":2948.0,"currency_code":"USD","in_stock":true},{"title":"Midnight Black \/ WA7e","offer_id":46368924500247,"sku":"","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Midnight Black \/ WA7e with STAX L500 MK2","offer_id":46368924533015,"sku":"","price":2169.0,"currency_code":"USD","in_stock":true},{"title":"Midnight Black \/ WA7e with STAX L700 MK2","offer_id":46368924565783,"sku":"","price":2948.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/4262\/files\/DSC03362.jpg?v=1692502373"}],"url":"https:\/\/www.mimic-audio.com\/collections\/hi-fi-hardware.oembed?page=2","provider":"Mimic-Audio","version":"1.0","type":"link"}